AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Tue Feb 16 17:32:21 2016
Author
*
:
Subject
*
:
MSL type BB18(DS)-1000 serial 2998-22 Bias +200V, I_L +=6.150uA, ambient temperature +20.1 deg C DSSSD - AIDA adaptor PCB cabling 4 off LH Coupler (Kapton PCB, 5cm), 2x 34-way Samtec ribbon cable (45cm), RH coupler(Kapton PCB, 10cm) + 3M 1245 1.4mil copper foil screen ribbon cables + RH coupler only (i.e. not LH coupler) + drain wires -> gold-plated Lemo-00 test input connectors nnaida 11 & 12 AIDA adaptor PCB rev B nnaida 13 & 14 AIDA adaptor PCB rev C (LK1 fitted) ground links LK3 & LK7 fitted to nnaida11-14 AIDA adaptor PCBs Heavy duty copper cable connects copper front end frames of FEE modules Nitto 5011N conductive gasket between FEE module and front end frames Standard ASIC settings nnaida 11 & 12 - negative input nnaida 13 & 14 - positive input Pulser BNC PB-5 Fall time 1.0ms Rate 100Hz Delay 250ns Ampl 5.00000V Polarity + Pulse top Tail Atten 10x Clamp ON - polarity via Cooknell SA1 Summing Amplifier 207Bi source, approx centred on DSSSD, approx 3cm from DSSSD File R16 shaping time 8uS slow comparator 8 (dec) start: 16.2.16 13.15 stop: 09.30 17.2.16 spectra saved to disk 10.30 BST (sic) Pulser OFF 16.2.16 09.35 Bias +200V, I_L +=5.940uA, ambient temperature +20.0 deg C
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown