AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:18:30 2025
Author
*
:
Subject
*
:
> File R17 -> pulser walkthrough. > - Started ~10.00 > - Pulser peak amplitude taken from 9.0V to 1.0 V in 1.0V steps > - Shaping time 8us, slow disc threshold 0x8 > - File stopped 10.32. Spectra (.msf) saved 10.34 > > File R18 -> pulser walkthrough. > - Started 10.41. > - Stepped the pulser amp by 0.1V - too small. > - Not useful > - Stopped 10.50 > > File R19 - pulser walkthrough. > - Started 10.51 > - empty > > File R20 - empty > > File R21 -> pulser Walkthrough > - started 11.18 > - 1.0 - 0.2V in 0.2V steps. > - Stopped 11.50. Saved histograms 11.51. > > File R22 -> source spectrum. > - slow comp threshold @ 0x7 > - forgot to turn off pulser. => no good. > > file R23 -> source spectrum. > - slow comp threshold @ 0x7 > - started 16.09 > > 18.05 DAQ found stalled, nnaida11 non-responsive > FORCE reset nnaida11 OK > but SETUP and FORCE setup failed with timeouts > > Power-cycled all FEE modules to restart > > eventual restart following workstation restart > > file R29 > start 18.50 stop: 09.55 18.2.16 > spectra saved to disk 10.55 BST (sic) > see attachments 1-6 > > 09.56 bias +200V I_L +6.105uA ambient temperature 20.1 deg C
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown