AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:35:28 2025
Author
*
:
Subject
*
:
<p>I have changed the T9 system to be using Version 8.</p> <p>Tests using the detector and pulser seem to be ok.</p> <p>Transmission to the Merge and Merging operating ok</p> <p>Shaping time 8uS and threshold 64.</p> <p>Note:-</p> <p style="margin-left: 40px;">The Leading Edge Discriminator has changed in Version 8 and is a true implementation of a Leading Edge Discriminator. With hysteresis which requires the input signal to go below the threshold before allowing another trigger.</p> <p style="margin-left: 40px;">The Delay setting on the LED web page is removed.</p> <p style="margin-left: 40px;">The LED web page is aware of the version being used ( shown at the top of the page ) as the Threshold for the LED is an ADC value ( 0 to 16383 ) rather than a difference from the current baseline.</p> <p style="margin-left: 40px;">For a positive waveform where the baseline is expected to be about 8192 a value of 9000 will potentially give a trigger.</p> <p style="margin-left: 40px;">For a negative waveform where the baseline is expected to be about 8192 a value of 7000 will potentially give a trigger.</p> <p style="margin-left: 40px;">Example window attached.</p> <p>I would value feedback.</p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown