AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:27:05 2025
Author
*
:
Subject
*
:
> MSL type BB18(DS)-1000 serial 2998-22 > Bias +200V, I_L +=5.570uA, ambient temperature +19.8 deg C > > DSSSD - AIDA adaptor PCB cabling > > 4 off LH Coupler (Kapton PCB, 5cm), 2x 34-way Samtec ribbon cable (45cm), RH coupler(Kapton PCB, 10cm) > + 3M 1245 1.4mil copper foil screen ribbon cables + RH coupler only (i.e. not LH coupler) > + drain wires -> gold-plated Lemo-00 test input connectors > > nnaida 11 & 12 AIDA adaptor PCB rev B > nnaida 13 & 14 AIDA adaptor PCB rev C (LK1 fitted) > ground links LK3 & LK7 fitted to nnaida11-14 AIDA adaptor PCBs > > Heavy duty copper cable connects copper front end frames of FEE modules > Nitto 5011N conductive gasket between FEE module and front end frames > > Standard ASIC settings > nnaida 11 & 12 - negative input > nnaida 13 & 14 - positive input > > Pulser BNC PB-5 > Fall time 1.0ms > Rate 100Hz > Delay 250ns > Ampl 5.00000V > Polarity + > Pulse top Tail > Atten 10x > Clamp ON > - polarity via Cooknell SA1 Summing Amplifier > > 207Bi source, approx centred on DSSSD, approx 3cm from DSSSD > > *** N.B. AIDA FEE firmware version 8 *** > > File R36 > shaping time 8uS > slow comparator 7 (dec) > start: 12.20 stop: 09.54 24.2.16 > spectra saved to disk 24.2.16 10.55 BST (sic) > Pulser OFF > > 09.55 Bias +200V, I_L +=5.695uA, ambient temperature +19.8 deg C > > No Merger error messages
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown