AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:28:32 2025
Author
*
:
Subject
*
:
> MSL type BB18(DS)-1000 serial 2998-22 > Bias +200V, I_L +=5.515uA, ambient temperature +19.8 deg C > > DSSSD - AIDA adaptor PCB cabling > > 4 off LH Coupler (Kapton PCB, 5cm), 2x 34-way Samtec ribbon cable (45cm), RH coupler(Kapton PCB, 10cm) > + 3M 1245 1.4mil copper foil screen ribbon cables + RH coupler only (i.e. not LH coupler) > + drain wires -> gold-plated Lemo-00 test input connectors > > nnaida 11 & 12 AIDA adaptor PCB rev B > nnaida 13 & 14 AIDA adaptor PCB rev C (LK1 fitted) > ground links LK3 & LK7 fitted to nnaida11-14 AIDA adaptor PCBs > > Heavy duty copper cable connects copper front end frames of FEE modules > Nitto 5011N conductive gasket between FEE module and front end frames > > Standard ASIC settings > nnaida 11 & 12 - negative input > nnaida 13 & 14 - positive input > > Pulser BNC PB-5 > Fall time 1.0ms > Rate 100Hz > Delay 250ns > Ampl 5.00000V > Polarity + > Pulse top Tail > Atten 10x > Clamp ON > - polarity via Cooknell SA1 Summing Amplifier > > 207Bi source, approx centred on DSSSD, approx 3cm from DSSSD > > AIDA FEE firmware version 8 > + sync 500kHz ASIC clock > > File R53 > shaping time 8uS > slow comparator 10 (dec) > LEC/MEC fast comparator 16 (dec) > start: 10.50 stop: 13.30 23.3.16 > spectra saved to disk 14.30 (BST) (sic) > Pulser OFF > nnaida 11 disc # 55 disabled > 12 disc # 2 & 55 disabled > 13 & 14 *no* discs disabled > > nnaida14 sampling ADCs not calibrated for previous run *but* no wavfeform data streams enabled so not a > problem > > new PCS diagnostics indicate FEE ASIC clocks aligned & synchronised - check! > > File R53 > shaping time 8uS > slow comparator 10 (dec) > LEC/MEC fast comparator 10 (dec) > start: 14.30 23.3.16 stop: > spectra saved to disk > > Pulser OFF > > nnaida 11 disc # 55 disabled > 12 disc # 2 & 55 disabled > 13 & 14 *no* discs disabled > > nnaida11, 12, 13 & 14 waveforms & verniers enabled - see attachments 1-7 > (data queue for nnaida12 waveforms & verniers disabled to avoid problems merger even though nnaida > produces WAVE SYNCs) > > R54 stopped at 16:54. disc full.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown