AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed Apr 2 01:41:42 2025
Author
*
:
Subject
*
:
<p>Trying the AIDA format power supply with the simple filters installed.</p> <p>The detector is attached and HV of 200v@3.8uA</p> <p>Using one channel from each FEE64 as a guide to compare performance. Using the Integrate analysis function Peak width.</p> <p>With the bench power supply and the restored setup for the ASICs. </p> <p>FEE64 #11:1.4.L:311, #12:2.8.L:183, #13:1.4.L:202, #14:1.4.L:342</p> <p>Change to the filtered power supply</p> <p>FEE64 #11:1.4.L:345, #12:2.8.L:414, #13:1.4.L:311, #14:1.4.L:476</p> <p>Add Braid between the LEMO00 connectors on the two adaptor boards using "croc" clips.</p> <p>FEE64 #11:1.4.L:172, #12:2.8.L:141, #13:1.4.L:106, #14:1.4.L:161</p> <p>Change the shaping time of all the ASICs from 0.5uS to 5uS</p> <p>FEE64 #11:1.4.L:128, #12:2.8.L:127, #13:1.4.L:119, #14:1.4.L:199</p> <p> </p> <p>I think this means the AIDA power supply with the simple filters is equivalent or better than the bench supply.</p> <p>Good news I think.....</p> <p>It needs a more extensive test ( more channels ? )</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown