AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed May 25 18:51:54 2016
Author
*
:
Subject
*
:
The attached firmware file, FEE_GF_Feb16_18.bin, should be saved to /MIDAS/Aida and the FlashPgm.csh file edited to load "FEE_GF_Feb16_18.bin" Use the Run Control Expert command to update the firmware on all the FEE64s. Power cycle the FEE64s to load the new firmware. Make a backup copy of the files in the directory /MIDAS/TclHttpd/Html/AIDA/DISC. Unzip the files from DISC_25May16.zip and copy them into /MIDAS/TclHttpd/Html/AIDA/DISC to replace the existing ones. Make a backup copy of the file /MIDAS/TclHttpd/Html/AIDA/LOCAL.tml Unzip the file from LOCAL_tml_25May16.zip and copy into /MIDAS/TclHttpd/Html/AIDA/LOCAL to replace the existing file. 'RESET' and browser refresh the two updated control windows to load the new software. ----------------------------------------------------- To use the Multiplicity Trigger:- In the Local Controls select option 5 for the Trigger. In the Discriminator window. Set the 'Upper Limit' Set the 'Lower Limit' ( always greater than 0 ..... or the Trigger will always be present ) Set the 'Time window'. The number of 10nS clocks. So 4 => 40nS. Register is 0 to 255. ----------------------------------------------------- These registers are not in the Save/Restore set yet. Tested on the T9 system using the pulser and setting/clearing Mask bits. Please let me know how this works for you.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
FEE_GF_Feb16_18.bin
Attachment 2:
DISC_25May16.zip
Attachment 3:
LOCAL_tml_25May16.zip
Attachment 4:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown