AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:16:56 2025
Author
*
:
Subject
*
:
> > Done. Awaiting test. See attachments 1-2. > > > The attached firmware file, FEE_GF_Feb16_18.bin, should be saved to /MIDAS/Aida and the FlashPgm.csh file edited > > to load "FEE_GF_Feb16_18.bin" > > > > Use the Run Control Expert command to update the firmware on all the FEE64s. > > > > Power cycle the FEE64s to load the new firmware. > > > > Make a backup copy of the files in the directory /MIDAS/TclHttpd/Html/AIDA/DISC. > > > > Unzip the files from DISC_25May16.zip and copy them into /MIDAS/TclHttpd/Html/AIDA/DISC to replace the existing > > ones. > > > > Make a backup copy of the file /MIDAS/TclHttpd/Html/AIDA/LOCAL.tml > > > > Unzip the file from LOCAL_tml_25May16.zip and copy into /MIDAS/TclHttpd/Html/AIDA/LOCAL to replace the existing > > file. > > > > 'RESET' and browser refresh the two updated control windows to load the new software. > > ----------------------------------------------------- > > > > To use the Multiplicity Trigger:- > > In the Local Controls select option 5 for the Trigger. > > > > In the Discriminator window. > > > > Set the 'Upper Limit' > > Set the 'Lower Limit' ( always greater than 0 ..... or the Trigger will always be present ) > > Set the 'Time window'. The number of 10nS clocks. So 4 => 40nS. Register is 0 to 255. > > > > ----------------------------------------------------- > > > > These registers are not in the Save/Restore set yet. > > > > Tested on the T9 system using the pulser and setting/clearing Mask bits. > > > > Please let me know how this works for you.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown