ELOG AIDA

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

AIDA

Fields marked with * are required
Entry time:	Fri Feb 28 07:59:14 2025
Author*:
Subject*:
> 1) Start Julabo FL11006 Recirculating Chiller > > See manual (page 19) http://www2.ph.ed.ac.uk/~td/AIDA/Information/Julabo%20FL11006.pdf > > Set point +20 deg C > > Check flow of coolant by inspecting the two flow indicators the left and right hand sides > on top of the AIDA stand > > Do NOT proceed if the Julabo FL11006 Recirculating Chiller is not operating, or if there is > little, or no, flow in one, or both, flow indicators. > > 2) Start interface to USB-controlled ac mains relay to AIDA data acquisition servers > > On the AIDA Dell T410 Workstation aidas1 switch to Desktop 7 and atart a Firefox web browser > > Enter URL http://nnrpi1:8015/AIDA/Rly16/ > > See attachment 1 > > Select 'Sequence ALL On' to powerup the AIDA data acquisition servers > > Check all relays Relay 1 to Relay 8 move from the 'Switch ON' to 'Switch OFF' row > > See attachment 2 > > Wait 8 minutes (yes - really!) before proceeding > > 3) Start Httpd Data Acquisition server > > See attachment 3 > > Switch to Desktop 1 and select MIDAS yellow icon 'Httpd for DataAcquisition' which will start a terminal > to display server messages as follows > > System identified is CPU x86_64; Platform is unix; OS is Linux and Version is 2.6.32-504.8.1.el6.x86_64 > Environment selected is CPU x64_64; Platform unix; OS Linux64 and Operating System Linux64 > MIDASBASE = /MIDAS@aidas and MIDAS_LIBRARY = /MIDAS@aidas/TclHttpd/Linux64 > PATH = > /MIDAS@aidas/bin_Linux64:/MIDAS@aidas/TclHttpd/Linux64:/homes/npg/root/bin:/homes/npg/root/bin:/homes/npg/root/lib:/MIDAS/Linux/bin64:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin > package limit is not available: can't find package limit > Running with default file descriptor limit > package setuid is not available: can't find package setuid > Could not change to user 50 group 50: not owner > /debug user "debug" password "jhi+u8jzdbpl" > httpd started on port 8015 > > Custom startup from /MIDAS@aidas/config/TclHttpd/aidas1@8015/startup.tcl > DefineMessage defined with server at http://elog.ph.ed.ac.uk:8015/MessageLoggerServer > /DataBaseAccessServer > /NetVarService > /SigTaskService > Loaded MemSasAccess > /SpectrumService > loading tcl/AIDARunControl.tcl for namespace :: > RunControlClient provided > RunControlClient loaded > Completed custom startup from /MIDAS@aidas/TclHttpd/Html/AIDA/RunControl/stats.defn.tcl > > See attachment 4 > > 4) Start web browser for interface to AIDA > > Switch to Desktop 1 and start Firefox web browser > > Enter URL localhost:8015 > > See attachments 5-6 > > 5) Commence startup of AIDA interface > > Select AIDA Experiment Control > > 6) From AIDA Experiment Control tab > > See attachment 7 > > Select AIDA Hardware Control > > See attachment 8 > > Re-select AIDA Experiment Control tab > > Select Data Acquisition Run Control > > 7) From Data Acquisition Run Control tab > > See attachment 9 > > Select Act On ALL Data Acquisition Servers > > See attachment 10 > > Select Reset > > Wait for update and check state of all data acquisition servers is 'reset' > > Select Setup > > See attachment 11 > > Wait for timestamp re-synchronisation pop-up > > See attachment 12 > > Usually all data acquisition servers (nnaida1, nnaida2 ... etc) will ReSYNC OK > Sometimes one, or more, data acquisition servers report ReSYNC not complete > > Re-select AIDA Hardware Control tab and select Master Timestamp Control > > From the Master Timestamp Control tab > > Select Reload > > Select FEE64 -> nnaida6 > > Select Perform ReSYNC > > See attachment 13 > > Wait for timestamp re-synchronisation pop-up > > See attachments 14-15 > > > > 8) AIDA: Master Timestamp Control > > Ditto ReSync > > 7) Data Acquisition Run Control > > 8) Spectrum Browser Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown