AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  AIDA  ELOG logo
 List  |  New  |  Edit  |  Delete  |  Reply  |  Duplicate  |  Find  |  Config  |  Help 
Entry  Mon May 30 06:03:51 2016, CG, TD, MACB settings 
    Reply  Mon May 30 08:18:48 2016, CG, TD - PJCS reply, MACB settings 
       Reply  Mon May 30 08:43:10 2016, CG, TD - PJCS reply, MACB settings 
Message ID: 258     Entry time: Mon May 30 08:43:10 2016     In reply to: 257
Author: CG, TD - PJCS reply 
Subject: MACB settings 

Quote:

Quote:

14.00 MACB settings (from left -> right)

MACB# 1 2 3 4 5 6 7 8 9 10 11
Setting 0 2 2 3 3 3 3 3 3 3 3

           MACB#1 is grandparent in tree

           #2 and #3 are parents

           Rest are children.

14.05 MACBs 1 and 3 (master) replaced with spares. No change, clocks remain not locked.

 PJCS _ reply The Master branch of the Tree needs to be set to 2 all the way to the Master.

So 

GrandParent : 0

Parents : Master Branch 2 , Others 3

Children: Master Branch 2, Others 3.

Carry out a system Reset/Setup after changing to these settings.

Then System wide checks.

 

 Apologies, I made a mistake in the information above.

MACB#1 is the grandparent, but #2 and #7 are the parents, with #3-6 and #8-11 the children.

The master goes through MACB#2 to the first port on #3.

So the current setup follows, and always has done, your instructions above.

ELOG V3.1.4-unknown