AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed Apr 2 01:41:36 2025
Author
*
:
Subject
*
:
<p> I've added the power supply change document.</p> <p>Please have a look and let me know if it requires further clarification.</p> <p>I have ordered some plastic "pot twiddlers".</p> <div> </div> <p>I have run a simple test with the four FEE64 here + detector.</p> <p>The sequence was :- </p> <p>Run the system with filtered PSU and record FWHM for 1.4.L for each of the four FEE64 boards.</p> <p>Replace the PSU with a standard but with outputs set as per the attachement.</p> <p>Results were approx 1.5 x worse.</p> <p>Replace filtered PSU..... back as expected.</p> <h1>Addition: For Filter PSU only :- Set +5v to +6v when the FEE64 is not attached.</h1> <p>This is required as the extar impedance of the filter drops the voltage too much by the time it reaches the FEE64.</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown