Runs 41 and 42 are quite short. Run 41 was interrupted by the beam dropping (operators called), and run 42 we are just trying to get EURICA to synchronize with AIDA DAQ.
1:08 Started AIDA Run 43 for 60Ti beam (EURICA run 2027; BigRIPS run 2132; CAEN Run 3018)
Leak currents less than 5 uA. See attachments 1 & 2
Scalers are shown as attachment 3
FEEE synchronization with pulser signal is shown as attachment 4
1:21 operator calls to note that the beam is stopped.
1:25 started AIDA run 44 for 60Ti beam (EURICA run 2028; BigRIPS #2133; CAEN #3019)
1:31 stopped because CAEN DAQ goes down.
1:34 started AIDA run 45 for 60Ti beam (EURICA run 2029; BigRIPS #2134; CAEN #3020)
1:37 data stops writing to disk for AIDA for unknown reason.
1:50 nnaida11 showed no SYNCs. Stop / GO on Run Control resolves it.
but 18 is off for the merger link. was this the status quo? try to reboot the merger but everything gets upset.
my first power cycle alone! (daid)
load the settings file 2016Jun10-20.30.18 which seems to be the most recent one
it takes some time, but finally I can get things up and running it seems.
2:40 still 18 link is down. strange. hopefully it's an acceptable loss, because I think it has been a long day for everyone.
OH DUH! nnaida19 hasn't been working for the entire experiment!! Just I forgot on the merge links it is offset 0 and not offset 1 for counting.
I could get some practice restoring AIDA at least?
Anyway, there had been some problems from run 45, and now all is well.
2:40 AIDA run 46. It's just a test that the system is working. But I forgot to put the TapeServer Volume Name so who knows where it ended up (discarded to /dev/null ?)
2:42 AIDA run 47, started with EURICA up and ready. (BigRIPS #2137; EUIRCA #2032; CAEN #3023)
Basically everything looks reasonable I think
SSD XY pattern looks basically okay. See attachment
Pulser shows the FEEs are synchronized nicely. See attachment 6
Biases and leak currents are shown in attachments 7 and 8
Scalers are shown as attachment 9
Check the pause/resumes. From the html Statistics page, nnaida20 shows some pauses, while nnaida24 seems to pause regularly.
I use Tom's program as outlined in a previous elog. He said we shall want the elapsed dead time to be much less than the timestamp elapsed
~/td/GREAT/analyser2 /TapeData/NP1512/AIDA47_26
*** GREAT format 3.2.0 analyser - TD - May 2014
*** FEE64 discriminator: block: 23312 ptr: 2071 data: 0x98638000 module: 24 information type: 6 information field: 0x00038000 ts: 0x0083500000A0 OLD: ts: 0x00836000009F tag: 2 type: 6
*** ERROR: READ I/O error: 5002
blocks: 32000
ADC data format: 140888182 ( 963280.2 Hz)
Other data format: 120231818 ( 822048.6 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 4747 ( 32.5 Hz)
RESUME: 4747 ( 32.5 Hz)
SYNC100: 55794 ( 381.5 Hz)
FEE64 disc: 119436810 ( 816612.9 Hz)
MBS info: 729720 ( 4989.2 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 286072 ( 1955.9 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 0 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 1 ( 0.0 Hz)
FEE64 disc: 1 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
Timestamp elapsed time: 146.259 s
FEE module #: 1 elapsed dead time 0.019 s
FEE module #: 2 elapsed dead time 0.232 s
FEE module #: 3 elapsed dead time 0.002 s
FEE module #: 4 elapsed dead time 0.000 s
FEE module #: 5 elapsed dead time 0.255 s
FEE module #: 6 elapsed dead time 0.215 s
FEE module #: 7 elapsed dead time 0.001 s
FEE module #: 8 elapsed dead time 0.000 s
FEE module #: 9 elapsed dead time 0.028 s
FEE module #: 10 elapsed dead time 0.000 s
FEE module #: 11 elapsed dead time 0.036 s
FEE module #: 12 elapsed dead time 0.089 s
FEE module #: 13 elapsed dead time 0.001 s
FEE module #: 14 elapsed dead time 0.034 s
FEE module #: 15 elapsed dead time 0.000 s
FEE module #: 16 elapsed dead time 0.478 s
FEE module #: 17 elapsed dead time 0.000 s
FEE module #: 18 elapsed dead time 0.077 s
FEE module #: 19 elapsed dead time 0.000 s
FEE module #: 20 elapsed dead time 0.166 s
FEE module #: 21 elapsed dead time 0.760 s
FEE module #: 22 elapsed dead time 0.029 s
FEE module #: 23 elapsed dead time 0.755 s
FEE module #: 24 elapsed dead time 0.448 s
FEE module #: 25 elapsed dead time 0.000 s
FEE module #: 26 elapsed dead time 0.000 s
FEE module #: 27 elapsed dead time 0.000 s
FEE module #: 28 elapsed dead time 0.000 s
FEE module #: 29 elapsed dead time 0.000 s
FEE module #: 30 elapsed dead time 0.000 s
FEE module #: 31 elapsed dead time 0.000 s
FEE module #: 32 elapsed dead time 0.000 s
It could be around 5% total, but I do not think it is so terrible.
4:56 AIDA Run 47_53 begins 4:56. We do not restart the runs. EURICA also automatically had the new run 2033 at 4:56. BigRIPS manually stop / start is now at 2138 (4:57). CAEN run is still 3023.
5:02: At start of run, the beam dropped
5:05 PPAC F3 1A trips.
Leak current shown as attachment 10 and 11
Scalers shown as attachment 12
FEE sync looks good, as well as SSD XY. About 370 MB of ROOT tree (compared to typical check of 50 MB) Attachments 13 and 14, respectively.
Here are Tom's pause information
aidas1> ~/td/GREAT/analyser2 /TapeData/NP1512/AIDA47_53
*** GREAT format 3.2.0 analyser - TD - May 2014
*** ERROR: READ I/O error: 5002
blocks: 32000
ADC data format: 146454667 ( 944617.0 Hz)
Other data format: 114665333 ( 739579.2 Hz)
Sample trace data format: 0 ( 0.0 Hz)
Undefined format: 0 ( 0.0 Hz)
Other data format type: PAUSE: 4216 ( 27.2 Hz)
RESUME: 4216 ( 27.2 Hz)
SYNC100: 59144 ( 381.5 Hz)
FEE64 disc: 113857390 ( 734368.1 Hz)
MBS info: 740367 ( 4775.3 Hz)
Other info: 0 ( 0.0 Hz)
ADC data range bit set: 272434 ( 1757.2 Hz)
Timewarps: ADC: 0 ( 0.0 Hz)
PAUSE: 1 ( 0.0 Hz)
RESUME: 0 ( 0.0 Hz)
SYNC100: 0 ( 0.0 Hz)
FEE64 disc: 0 ( 0.0 Hz)
MBS info: 0 ( 0.0 Hz)
Undefined: 0 ( 0.0 Hz)
Sample trace: 0 ( 0.0 Hz)
Timestamp elapsed time: 155.041 s
FEE module #: 1 elapsed dead time 0.014 s
FEE module #: 2 elapsed dead time 0.231 s
FEE module #: 3 elapsed dead time 0.005 s
FEE module #: 4 elapsed dead time 0.000 s
FEE module #: 5 elapsed dead time 0.220 s
FEE module #: 6 elapsed dead time 0.040 s
FEE module #: 7 elapsed dead time 0.000 s
FEE module #: 8 elapsed dead time 0.009 s
FEE module #: 9 elapsed dead time 0.043 s
FEE module #: 10 elapsed dead time 0.005 s
FEE module #: 11 elapsed dead time 0.064 s
FEE module #: 12 elapsed dead time 0.006 s
FEE module #: 13 elapsed dead time 0.008 s
FEE module #: 14 elapsed dead time 0.039 s
FEE module #: 15 elapsed dead time 0.065 s
FEE module #: 16 elapsed dead time 0.457 s
FEE module #: 17 elapsed dead time 0.000 s
FEE module #: 18 elapsed dead time 0.015 s
FEE module #: 19 elapsed dead time 0.000 s
FEE module #: 20 elapsed dead time 0.059 s
FEE module #: 21 elapsed dead time 0.330 s
FEE module #: 22 elapsed dead time 0.043 s
FEE module #: 23 elapsed dead time 0.989 s
FEE module #: 24 elapsed dead time 0.462 s
FEE module #: 25 elapsed dead time 0.000 s
FEE module #: 26 elapsed dead time 0.000 s
FEE module #: 27 elapsed dead time 0.000 s
FEE module #: 28 elapsed dead time 0.000 s
FEE module #: 29 elapsed dead time 0.000 s
FEE module #: 30 elapsed dead time 0.000 s
FEE module #: 31 elapsed dead time 0.000 s
FEE module #: 32 elapsed dead time 0.000 s
*** Program elapsed time: 21.295s ( 1502.706 blocks/s, 93.919 Mb/s)
|