AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:28:42 2025
Author
*
:
Subject
*
:
<p> <table width="98%" align="center" cellspacing="1" style="border:1px solid #486090;"> <tbody> <tr> <td cellpadding="3px" style="background-color:#486090; font-weidht:bold; color:white;">Quote:</td></tr> <tr> <td cellpadding="10px" style="background-color:#FFFFB0;"><p>An updated copy of the merger has been downloaded ( merger64.AD ) with a copy of /MIDAS/Merger/AIDA/Startup.</p> <p>These two enable the output of all of the SYNC data items to the TapeServer.</p> <p> </p> <p>The System Wide Checks browser window has been updated and includes a report of the number SYNC pulses sent by the Master timestamp module and the number of SYNC pulses received by the Slave modules. These should all be the same value.</p> <p> </p> <p>The ASIC4 browser window has been updated to add two actions to the Experts only menu. "Disable all ASICs For Readout" and "Enable all ASICs for Readout". These two are useful when starting a noisy system. The sequence would be to start the Merger, toggle Pause. Then start the DAQ ( FEE64s ). "Disable all ASICs For Readout" then in the Merger toggle Pause. I found this made starting the merging much more successful. Then "Enable all ASICs for Readout" to run. I shall add similar actions to the Discriminators but will ensure the Mask Patterns set by the Restore are maintained and restored by the "Enable" action.</p> <p>Before adding this capability it was quite hard to tune the system to guarantee the Merger a full set of SYNC data items at any one time. I have been running the FEE64s with low thresholds, detectors and no HV.</p> <p> </p></td> </tr> </tbody> </table> </p><p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown