AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 20:13:24 2025
Author
*
:
Subject
*
:
11.40 R8 continues B2F/FF temp +25 deg C, d.p. +14 deg C, RH 51% DSSSD bias/leakage current OK - see attachments 1-2 FEE64 temperatures OK - see attachment 3 System-wide checks OK - see attachments 4-9 AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6 statistics - see attachments 10-16 Some error messages observed for merger - see attachment 17-18 All related to Q5 (nnaida6) Analysis of R8_231 shows data synchronised 18.07 R8 stops At end of run (file R8_310) BNC PB-4 pulser ref switch INT -> EXT to check for possible skew in data synchronisation Analysis of R8_310 shows no evidence of skew, i.e. all FEE64s are observed to stop producing pulser events at same time 19.21 R9 starts ASIC settings 2016Aug20-15.34.53 Discriminator masks -> 0x0 BNC PB-4 Pulser Amplitude 90,000 x5 attenuator IN t_r 50ns tau_d 50us - polarity INT ref, delay MIN, tail pulse BNC PB-4 pulser triggered by EG&G Ortec 462 Start output - frequency ~120Hz - Range 81.92us From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5 ASIC Control -> Check ASIC Control required after DAQ GO BNC PB-4 pulser triggered by EG&G Ortec 462 Start output - frequency ~120Hz - Range 81.92us From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5 System-wide checks OK - see attachments 19-24 AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6 statistics x2 - see attachments 25-32
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown