AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:25:37 2025
Author
*
:
Subject
*
:
> 11.40 R8 continues > > B2F/FF temp +25 deg C, d.p. +14 deg C, RH 51% > > DSSSD bias/leakage current OK - see attachments 1-2 > FEE64 temperatures OK - see attachment 3 > System-wide checks OK - see attachments 4-9 > > AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6 statistics - see attachments > 10-16 > > Some error messages observed for merger - see attachment 17-18 > All related to Q5 (nnaida6) > > Analysis of R8_231 shows data synchronised > > 18.07 R8 stops > > At end of run (file R8_310) BNC PB-4 pulser ref switch INT -> EXT to check for possible skew in data > synchronisation > > Analysis of R8_310 shows no evidence of skew, i.e. all FEE64s are observed to stop producing pulser events > at same time > > 19.21 R9 starts > > ASIC settings 2016Aug20-15.34.53 > Discriminator masks -> 0x0 > > BNC PB-4 Pulser > Amplitude 90,000 > x5 attenuator IN > t_r 50ns tau_d 50us > - polarity > INT ref, delay MIN, tail pulse > BNC PB-4 pulser triggered by EG&G Ortec 462 Start output - frequency ~120Hz - Range 81.92us > From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5 > > ASIC Control -> Check ASIC Control required after DAQ GO > > BNC PB-4 pulser triggered by EG&G Ortec 462 Start output - frequency ~120Hz - Range 81.92us > From Correlation Status & Control tab change Trigger delay from 0x180 to 0x5 > > System-wide checks OK - see attachments 19-24 > AIDA SYNC, PAUSE, RESUME, Correlation L, SYNC time warp, Good Events, nnaida6 statistics x2 - see attachments > 25-32 >
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown