AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:37:01 2025
Author
*
:
Subject
*
:
Installed Xilinx 14.7 LabTools + (free) WebPack license Start iMPACT Connect Xilinx programmer via 14-way ribbon cable to MACB PCB jtag connector and connect USB cable to laptop Powerup NIM bin with MACB (serial #13) Auto-install Xilinx programmer driver Use iMPACT Wizard to automagically find Xilinx device of MACB Load new *.jed file Operations -> Program Operations -> Verify TTY console log Welcome to iMPACT iMPACT Version: 14.7 Project: C:\Xilinx\14.7\LabTools\LabTools\auto_project.ipf created. // *** BATCH CMD : setMode -bs // *** BATCH CMD : setMode -bs // *** BATCH CMD : setMode -bs // *** BATCH CMD : setMode -bs GUI --- Auto connect to cable... // *** BATCH CMD : setCable -port auto INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4 INFO:iMPACT - Digilent Plugin: no JTAG device was found. AutoDetecting cable. Please wait. *** WARNING ***: When port is set to auto detect mode, cable speed is set to default 6 MHz regardless of explicit arguments supplied for setting the baud rates PROGRESS_START - Starting Operation. Connecting to cable (Usb Port - USB21). Checking cable driver. Driver file xusb_xp2.sys found. Driver version: src=2301, dest=2301. Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010 Build Date: Aug 31 2010 x86_64 64bit SYS 14:14:44, version = 1021. Cable PID = 0008. Max current requested during enumeration is 300 mA. Type = 0x0005. write (count, cmdBuffer, dataBuffer) failed C0000004. Cable Type = 3, Revision = 0. Setting cable speed to 6 MHz. Cable connection established. Firmware version = 2301. File version of C:/Xilinx/14.7/LabTools/LabTools/data/xusb_xp2.hex = 2401. Firmware hex file version = 2401. Downloading C:/Xilinx/14.7/LabTools/LabTools/data/xusb_xp2.hex. Downloaded firmware version = 2401. PLD file version = 200Dh. PLD version = 200Dh. PROGRESS_END - End Operation. Elapsed time = 1 sec. Type = 0x0005. ESN option: 000013E7C24E01. Attempting to identify devices in the boundary-scan chain configuration... INFO:iMPACT - Current time: 01/10/2016 09:30:42 // *** BATCH CMD : Identify -inferir PROGRESS_START - Starting Operation. Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc2c128, Version : 1 INFO:iMPACT:1777 - Reading C:/Xilinx/14.7/LabTools/LabTools/xbr/data/xc2c128.bsd... INFO:iMPACT:501 - '1': Added Device xc2c128 successfully. ---------------------------------------------------------------------- ---------------------------------------------------------------------- done. PROGRESS_END - End Operation. Elapsed time = 6 sec. // *** BATCH CMD : identifyMPM // *** BATCH CMD : assignFile -p 1 -file "C:/Users/td/Local Documents/misc/macb_top_revB.jed" '1': Loading file 'C:/Users/td/Local Documents/misc/macb_top_revB.jed' ... done. INFO:iMPACT:501 - '1': Added Device xc2c128 successfully. ---------------------------------------------------------------------- ---------------------------------------------------------------------- INFO:iMPACT - Current time: 01/10/2016 09:32:54 // *** BATCH CMD : Program -p 1 -e -v PROGRESS_START - Starting Operation. Maximum TCK operating frequency for this device chain: 33000000. Validating chain... Boundary-scan chain validated successfully. '1': Erasing device... '1': Erasure completed successfully. '1': Programming device... done. '1': Verifying device... done. '1': Setting ISC done bits...done '1': Programming completed successfully. PROGRESS_END - End Operation. Elapsed time = 2 sec. INFO:iMPACT - Current time: 01/10/2016 09:33:01 // *** BATCH CMD : Verify -p 1 PROGRESS_START - Starting Operation. Maximum TCK operating frequency for this device chain: 33000000. Validating chain... Boundary-scan chain validated successfully. '1': Verifying device... done. '1': Verification completed successfully. PROGRESS_END - End Operation. Elapsed time = 0 sec.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown