ELOG AIDA

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

AIDA

Fields marked with * are required
Entry time:	Sat Mar 29 12:29:20 2025
Author*:
Subject*:
> Installed Xilinx 14.7 LabTools + (free) WebPack license > > Start iMPACT > > Connect Xilinx programmer via 14-way ribbon cable to MACB PCB jtag connector > and connect USB cable to laptop > > Powerup NIM bin with MACB (serial #13) > > Auto-install Xilinx programmer driver > > Use iMPACT Wizard to automagically find Xilinx device of MACB > > Load new .jed file > Operations -> Program > Operations -> Verify > > TTY console log > > Welcome to iMPACT > iMPACT Version: 14.7 > Project: C:\Xilinx\14.7\LabTools\LabTools\auto_project.ipf created. > // BATCH CMD : setMode -bs > // * BATCH CMD : setMode -bs > // * BATCH CMD : setMode -bs > // * BATCH CMD : setMode -bs > GUI --- Auto connect to cable... > // * BATCH CMD : setCable -port auto > INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4 > INFO:iMPACT - Digilent Plugin: no JTAG device was found. > AutoDetecting cable. Please wait. > * WARNING *: When port is set to auto detect mode, cable speed is set to default 6 MHz regardless of explicit arguments supplied for > setting the baud rates > PROGRESS_START - Starting Operation. > Connecting to cable (Usb Port - USB21). > Checking cable driver. > Driver file xusb_xp2.sys found. > Driver version: src=2301, dest=2301. > Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010 Build Date: Aug 31 2010 x86_64 64bit SYS 14:14:44, > version = 1021. > Cable PID = 0008. > Max current requested during enumeration is 300 mA. > Type = 0x0005. > write (count, cmdBuffer, dataBuffer) failed C0000004. > Cable Type = 3, Revision = 0. > Setting cable speed to 6 MHz. > Cable connection established. > Firmware version = 2301. > File version of C:/Xilinx/14.7/LabTools/LabTools/data/xusb_xp2.hex = 2401. > Firmware hex file version = 2401. > Downloading C:/Xilinx/14.7/LabTools/LabTools/data/xusb_xp2.hex. > Downloaded firmware version = 2401. > PLD file version = 200Dh. > PLD version = 200Dh. > PROGRESS_END - End Operation. > Elapsed time = 1 sec. > Type = 0x0005. > ESN option: 000013E7C24E01. > Attempting to identify devices in the boundary-scan chain configuration... > INFO:iMPACT - Current time: 01/10/2016 09:30:42 > // * BATCH CMD : Identify -inferir > PROGRESS_START - Starting Operation. > Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc2c128, Version : 1 > INFO:iMPACT:1777 - > Reading C:/Xilinx/14.7/LabTools/LabTools/xbr/data/xc2c128.bsd... > INFO:iMPACT:501 - '1': Added Device xc2c128 successfully. > ---------------------------------------------------------------------- > ---------------------------------------------------------------------- > done. > PROGRESS_END - End Operation. > Elapsed time = 6 sec. > // * BATCH CMD : identifyMPM > // * BATCH CMD : assignFile -p 1 -file "C:/Users/td/Local Documents/misc/macb_top_revB.jed" > '1': Loading file 'C:/Users/td/Local Documents/misc/macb_top_revB.jed' ... > done. > INFO:iMPACT:501 - '1': Added Device xc2c128 successfully. > ---------------------------------------------------------------------- > ---------------------------------------------------------------------- > INFO:iMPACT - Current time: 01/10/2016 09:32:54 > // * BATCH CMD : Program -p 1 -e -v > PROGRESS_START - Starting Operation. > Maximum TCK operating frequency for this device chain: 33000000. > Validating chain... > Boundary-scan chain validated successfully. > '1': Erasing device... > '1': Erasure completed successfully. > '1': Programming device... > done. > '1': Verifying device... > done. > '1': Setting ISC done bits...done > '1': Programming completed successfully. > PROGRESS_END - End Operation. > Elapsed time = 2 sec. > INFO:iMPACT - Current time: 01/10/2016 09:33:01 > // * BATCH CMD : Verify -p 1 > PROGRESS_START - Starting Operation. > Maximum TCK operating frequency for this device chain: 33000000. > Validating chain... > Boundary-scan chain validated successfully. > '1': Verifying device... > done. > '1': Verification completed successfully. > PROGRESS_END - End Operation. > Elapsed time = 0 sec. Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown