AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:29:26 2025
Author
*
:
Subject
*
:
> 08.15 DAQ found stalled > > Soft reset OK > > DSSSD bias & leakage currents OK - see attachments 1 & 2 > FEE64 temperatures OK - see attachment 3 > > Ambient temperature +25.0 deg C, d.p. -0.2 deg C, RH 19.2% > > System-wide checks OK *except* clock status errors for naida5, 7, 8, 15, 16 > > ASIC settings 2016Nov07-23.03.06 > > BNC PB-4 > amplitude 90,000 > frequency 25Hz range > > 08.30 AIDA moved into (CH2)n moderator > > 08.46 Start DAQ (R141) > BNC PB_4 pulser OFF > Background run with AIDA inside (CH2)n moderator > > Statistics - good events - attachment 4 > > per FEE64 1.8.W spectra - see attachments 5-8 > > 09.00 DAQ stops OK > System wide checks OK > > BNC PB-4 pulser ON > amplitude 90,000 > x5 attenuator IN > t_r 50ns tau_d 50us > polarity -, delay MIN, tail pulse > frequency 25Hz range > > 14.51 Bias and leakage voltages good (Attachments 9 and 10) > > 16.30 Ca beam delivered to F11 around 16:30. > PB shield still in place up stream of AIDA. > DAQ running in no storage mode. Leakage currents @ 16:40 in attachments 11+12. > > 18.28 DAQ stopped during LN2 fill cycle. Soft reset completed. > Will wait 15mins for cycle to complete and the start new run. > > 18.34 Ca beam stopped. > > 19.07 Run R146 started on no storage mode. > > 20.11 DAQ found stopped. > Unable to perform soft reset. Power cycling FEEs.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown