AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Fri Feb 20 10:48:09 2015
Author
*
:
Subject
*
:
Set permissions for the USB-serial device using the command sudo chmod 777 /dev/ttyUSB0 Note: Vic Pucknell reports that he has sometime observed the device rotate between /dev/ttyUSB0, /dev/ttyUSB1, /dev/ttyUSB2 etc - make\ sure you are using the correct device name with the command: ls -l /dev/ttyUSB* Start PuTTY Select Connection Type 'Serial' Enter Serial Line (/dev/ttyUSB0 or /dev/ttyUSB1) Enter speed (9600) Select 'Open' Note: permissions for the USB-serial device will revert to their default (mode 440) when the OS notices the change but by then the serial line connection will have been established.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown