AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:36:46 2025
Author
*
:
Subject
*
:
MACB configuration can be found at https://elog.ph.ed.ac.uk/AIDA/357 To investigate system-wide check clock status errors for nnaida5, 7, 8, 15 & 16 PJCS requests changing MACB #3 (5, 6, 13 & 14) mode from 3 to 0 (all other MACB modes unchanged) followed by power-cycle of FEE64s System-wide checks - see attachments 1-11 No clock status errors observed for nnaida5 N.B. nnaida23 fails clock status Switch MACB #3 (7, 8, 15 & 16) from mode 0 to 3, and MACB #4 from 3 to 0 ------------------------------------------------------------------------ System-wide checks - see attachments 12-21 ReSync not complete for nnaida21, 22 Clock status errors observed for 5, 7, 8, 15, 16 *and* 21, 22 Switch MACB #4 (21, 22, 29 & 30) from mode 0 to 3, and MACB #5 (7, 8, 15 & 16) from 3 to 0 ------------------------------------------------------------------------------------------ System-wide checks - see attachments 22-28 ReSync not complete for nnaida7, 8, 15 & 16 Clock status errors observed for nnaida7, 8, 15 & 16 - status = 0 Switch MACB #5 (21, 22, 29 & 30) from mode 0 to 3 ------------------------------------------------- System-wide checks - see attachments 29-33 ReSync OK Clock status errors observed for nnaida5, 7, 8, 15 & 16 - status = various, bit 2 always set (as before) Replace MACB #5 (was rev A, MACB serial #9) with MACB serial #13 (rev A, firmware 16.4.15) mode 3 ------------------------------------------------------------------------------------------------- System-wide checks - see attachments 34-36 ReSync OK Clock status errors observed for nnaida5, 7, 8, 15 & 16 - status = various, bit 2 always set (as before) i.e. no change, MACB #5 NIM module not the problem Replace MACB #1 (was rev B, MACB serial #21) with MACB serial #38 (rev B, firmware 16.4.15, internal CLK TERM mod) mode 0 ------------------------------------------------------------------------------------------------------------------------- System-wide checks - see attachments 37-40 ReSync OK *ALL* system-wide checks OK Offline analysis of file Dec2016/R1_5 demonstrates ADC & disc data synchronised - see attachments 41 & 42
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown