AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:27:59 2025
Author
*
:
Subject
*
:
> Clock settings for this experiment are slightly different than in the previous case. > > Below are strictly the settings for the waveform generator itself. > > Sent to AIDA side: 0 to 5 V amplitude, 50 MHz frequency > > Sent to BRIKEN side: 0 to 5 V amplitude, 25 MHz frequency > > Thus, both teams are taking TTL-type signals. However, the BRIKEN one goes to the Philips module which essentially converts it straight away to NIM. > > There may have been a slight misunderstanding yesterday about the setup, but finally the waveform signal going to BRIKEN was checked and there was no problem. So we don't make > any changes (e.g. changing the waveform generator to a NIM-type output).
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown