ELOG AIDA

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

AIDA

Fields marked with * are required
Entry time:	Sat Mar 29 12:27:54 2025
Author*:
Subject*:
> > 09.13 DAQ run R3 ends OK (final file R3_9) > > ASIC settings 2017Mar27-16.12.39 > slow comparator 100 (dec) > LEC/MEC fast comparator 255 (dec) > BNC PB-4 pulser OFF > > 09.20 Biases & leakage currents OK - see attachments 1 & 2 > Ambient temperature +23.8 deg C, d.p. -3.5 deg C, RH 15.7% > Julabo FL11006 set point +20 deg C actual +20.0 deg C > > 09.32 FEE64 temperatures OK - see attachment 3 > > 09.39 System-wide checks OK except > ADC calibration fails nnaida21 & 23 > SYNC errors not counted since baseline > SYNC pulses received > see attachments 4-8 > > 13.36 PE16/R1 > > Pulser walkthough > > BNC PB-4 settings > Amplitude 90,000 - 10,000 @ 10,000 step > x5 attenuator IN > t_r 50ns, tau_d 50us > polarity - > rate ~250Hz > delay MIN, tail pulse > > ASIC settings 2017Mar27-16.12.39 > > see attachment 9 > > 13.52 PE16/R2 > > Pulser walkthough > > BNC PB-4 settings > Amplitude 10,000 - 2,000 @ 2,000 step > > see attachment 10 > > 14.03 PE16/R3 > > Pulser walkthough > > BNC PB-4 settings > Amplitude 2,000 - 8,000 @ 2,000 step, 10,000 - 50,000 @ 10,000 step > > see attachment 11 > > 20.30 System-wide checks > All OK except clock status - nnaida1 global clocks failed 6 - see attachment 12 > > 20.35 PE16/R4 > > Background > > BNC PB-4 OFF > > ASIC settings 2017Mar27-16.12.39 > > MACB master mode 5 (external 50MHz clock from Tektronix AFG3102C) > > 20.40 Biases & leakage currents OK - see attachments 13 & 14 > Ambient temperature +23.6 deg C, d.p. -3.2 deg C, RH 16.6% > Julabo FL11006 set point +20 deg C actual +20.0 deg C > FEE64 temperatures OK - see attachment 15 > > 20.50 PE16/R4 ends OK Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown