AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:37:26 2025
Author
*
:
Subject
*
:
Relatively painless start-up. Had an issue with firefox where all bookmarks had been forgotten. All drop down menues in the DAQ did not work. Kill all firefox processes to restore. Had to restart DHCP to get the rasp pi working again. At first no pulser was visible in all p-side FEEs. Cable and BNC adapter on output of inverter were switched out and the inverter output was switched from B to A. After this pulser signals were visible in all ASICS bar NNAIDA 14 ASIC 1. Power cycle was needed to regain this. No ADC data and no fast discriminator data. Waveform showed baseline at 16K compared to 8K expected. Layouts 1,2,3,4,7 and 8 attached (Zoomed in waveforms are included for 7 and 8 around baseline) attachments 1-8 Temperatures included as attachment 9 Leakages and bias all ok see attachment 10 Ambient T 24.3C Humidity 34.5% Dew point 7.6C (Measurements taken AM) system wide checks all ok. Pulser settings Amplitude 90000 x5 Attenuator in Rise time tr 50ns fall time tau d 50us Negative polarity freq 25Hz range Delay min Internal ref, tail pulse ASIC settings DB key 2017Mar27-16.12.39 16:26 Slow comparator threshold moved to 100 Fast comparator theshold LEC/MEC to 255 Run started to disk May2017/R1
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown