AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:26:17 2025
Author
*
:
Subject
*
:
> 09.54 DAQ continues OK > Current file May2017/R7_292 > > ASIC settings 2017Mar27-16.12.39 *except* > slow comparator 0x0a > LEC/MEC fast comparator 0xff > > Detector biases & leakage currents OK - see attachments 1 & 2 > FEE64 Temperatures OK - see attachment 3 > 'good events' statistics OK - see attachment 4 > No warnings/errors reported by merger since DAQ GO - see attachment 5 > > *all* system wide checks OK > > 10.02 Rate/HitRate spectra - see attachments 6 & 7 > 1.8.L ADC spectra - see attachments 8 & 9 > 1.8.W waveforms - see attachments 10-13 > > 10.07 Analysis of data file R7_294 - see attachment 14 > dead-time/idle-time < 0.5% > AIDA SYNC100 variations ~330/102000 > > 10.17 E17/F11 ambient temperature +25.1 deg C, RH 37.2%, d.p. +9.4 deg C > Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%) > > 10.19 DAQ stops OK > Current file May2017/R7_298 > > Files May2017/R7* *deleted* > > ASIC settings 2017Mar27-16.12.39 *except* > slow comparator 0x0a > LEC/MEC fast comparator 0xff > > BNC PB-4 settings > Amplitude 90,000 > x5 attenuator IN > t_r 50ns, tau_d 50us > polarity - > rate 250Hz range > delay MIN, tail pulse > > Check ASIC Control x2 > Zero all spectra > > 10.22 DAQ starts > File May2017/R8 > > Analysis of May2017/R8_3 confirms ADC data synchronisation - see attachments 15 & 16
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown