ELOG AIDA

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

AIDA

Fields marked with * are required
Entry time:	Sat Mar 29 12:37:12 2025
Author*:
Subject*:
10.01 DAQ continues OK Current file May2017/R8_334 ASIC settings 2017Mar27-16.12.39 except slow comparator 0x0a LEC/MEC fast comparator 0xff Detector biases & leakage currents OK - see attachments 1 & 2 FEE64 Temperatures OK - see attachment 3 'good events' statistics OK - see attachment 4 No warnings/errors reported by merger since DAQ GO - see attachment 5 all system wide checks OK 10.06 Analysis of data file R8_333 - see attachment 6 dead-time/idle-time < 2% AIDA SYNC100 variations ~1800/95000 10.10 E17/F11 ambient temperature +24.8 deg C, RH 36.4%, d.p. +8.9 deg C Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%) 10.15 DAQ stops OK Current file May2017/R7_298 Files May2017/R8* deleted ASIC settings 2017Mar27-16.12.39 except slow comparator 0x08 LEC/MEC fast comparator 0xff BNC PB-4 settings Amplitude 90,000 x5 attenuator IN t_r 50ns, tau_d 50us polarity - rate 250Hz range delay MIN, tail pulse Check ASIC Control x2 Zero all spectra 10.20 DAQ starts File May2017/R8 Transient timeouts at DAQ GO for FEE64s nnaida1 and nnaida2 which resolved themselves without user intervention DAQ run control transitioned from 'RESET and STOP/GO' to 'RESET' to 'RESET and STOP/GO' 10.22 DAQ stops File May2017/R9 Tapeserver data rates fluctuate 10-30Mb/s possibly due to parallel disk I/O activity (deleting R8 files) Transient timeouts at DAQ STOP for FEE64s nnaida1 and nnaida2 which resolved themselves without user intervention - see attachment 7 DAQ run control transitioned from 'RESET and STOP/GO' to 'RESET' to 'RESET and STOP/GO' ASIC settings 2017Mar27-16.12.39 except slow comparator 0x0a LEC/MEC fast comparator 0xff 10.31 DAQ starts File May2017/R10 Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown