AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  AIDA  ELOG logo
Message ID: 579     Entry time: Sat May 20 02:39:06 2017
Author: CB, OH 
Subject: Saturday 20 May 
10.35 DAQ continues OK 
      Current file May2017/R16

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida7

10.45 E17/F11 ambient temperature +24.8 deg C, RH 39.9%, d.p. +10.0 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)

11.00 DAQ stops OK
      Current file May2017/R16

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

11.10 DAQ starts
      File May2017/R17

16.30 DAQ continues OK 
      Current file May2017/R17

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK - see attachment 5
      FEE64 Temperatures OK - see attachment 6
      good events; statistics OK - see attachment 7
      No warnings/errors reported by merger since DAQ GO - see attachment 8

      *all* system wide checks OK *except* ADC calibration of nnaida7

16.45 E17/F11 ambient temperature +24.3 deg C, RH 39.1%, d.p. +9.5 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)

16.50 DAQ stops OK
      Current file May2017/R17

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

16.54 DAQ starts
      File May2017/R18
      Attached Ras Pi system console log for USB0
Attachment 1: 1.png  14 kB  Uploaded Sat May 20 03:43:29 2017  | Show | Hide all | Show all
Attachment 2: 2.png  135 kB  Uploaded Sat May 20 03:44:09 2017  | Hide | Hide all | Show all
2.png
Attachment 3: 3.png  91 kB  Uploaded Sat May 20 03:44:47 2017  | Hide | Hide all | Show all
3.png
Attachment 4: 4.png  327 kB  Uploaded Sat May 20 03:46:24 2017  | Hide | Hide all | Show all
4.png
Attachment 5: 5.png  14 kB  Uploaded Sat May 20 09:33:52 2017  | Hide | Hide all | Show all
5.png
Attachment 6: 6.png  136 kB  Uploaded Sat May 20 09:33:58 2017  | Hide | Hide all | Show all
6.png
Attachment 7: 7.png  91 kB  Uploaded Sat May 20 09:34:03 2017  | Hide | Hide all | Show all
7.png
Attachment 8: 8.png  338 kB  Uploaded Sat May 20 09:34:08 2017  | Hide | Hide all | Show all
8.png
Attachment 9: ttyUSB0  121 kB  Uploaded Sat May 20 09:54:00 2017  | Show | Hide all | Show all
ELOG V3.1.4-unknown