10.54 DAQ continues OK 
      Current file May2017/R18_208

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida7

10.58 E17/F11 ambient temperature +24.6 deg C, RH 40.5%, d.p. +10.3 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)

11.00 DAQ stops OK
      Current file May2017/R18_208
      Deleted R17*

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

      Check ASIC Control x2
      Zero all spectra

11.16 DAQ starts
      File May2017/R19
      Ras Pi system console logs for USB0 attached - see attachment 5

18.26 DAQ continues OK 
      Current file May2017/R19_77

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x0a
      LEC/MEC fast comparator 0xff

      Detector biases & leakage currents OK - see attachment 6 & 7
      FEE64 Temperatures OK - see attachment 8
      good events statistics OK - see attachment 9
      No warnings/errors reported by merger since DAQ GO - see attachment 10

      *all* system wide checks OK *except* ADC calibration of nnaida7

18.30 E17/F11 ambient temperature +24.7 deg C, RH 38.9%, d.p. +9.8 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 60%)