AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:35:48 2025
Author
*
:
Subject
*
:
> Concerning nnaida7 and the failure of calibration..... have you tried to calibrate it using the FADC Align & Control ? > If it still fails then there is a question about the quality of the clock signal being received by this module. > I will log through and look at the console log for any anomolies but please try and calibrate. > Let me know if you wish me to take remote control. Yes - there have been multiple attempts to re-calibrate nnaida7 ADCs Note *all* ADCs were calibrated before the most recent FEE64 power cycle. It is not unusual for ~1-3 FEE64s to fail ADC calibration tests following a power cycle - there is no obvious pattern to which ADCs fail or which (if any) will be successfully re-calibrated.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown