AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:36:45 2025
Author
*
:
Subject
*
:
11.00 Merger found stopped at 03:27 - current file R24_7 Restarted Merge. Stopped Run control. Run control stopped, got error message - see attachment 1 nnaida 1-16 show error, nnaida 17-24 show stopped - see attachment 2 No new panics in Raspberry Pi console monitor 13.10 Found FEE64 #1-16 power off - fuse failed in section #1 of USB-controlled ac mains relay - this fuse was replaced yesterday 13.15 Closed file May2017/R24 Closed DAQ, Merger & Tapeserver browsers & terminated terminal servers 13.22 Replaced 250V/16A/fast fuse *and* carrier in section #1 of USB-controlled ac mains relay - when fuse fails there is some solder leaks from base of fuse into carrier 13.25 Switch on relays # 1-8 at ~10s intervals Count 24 authenticated mount requests 13.26.02 to 13.27.30 - see attachment 5 13.31 E17/F11 ambient temperature +24.4 deg C, RH 40.0%, d.p. +9.9 deg C Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%) Detector biases & leakage currents OK - see attachments 3 & 4 13.39 Checked Pi-monitor - no further panics detected in FEE64 system logs 13.54 Turned on DAQ. FEE temperatures OK - see attach 6 System wide checks ok *except* nnaida1 clock status (status 6) and nnaida1,7,8,9,13,21,24 Manually recalibrated all *except* nnaida21 ASIC settings 2017Mar27-16.12.39 *except* slow comparator 0x64 LEC/MEC fast comparator 0x20 BNC PB-4 settings Amplitude 90,000 x5 attenuator IN t_r 50ns, tau_d 50us polarity - rate 250Hz range delay MIN, tail pulse Current file R26 ttyUSB0 attached - 7 14.04 good events statistics - see attachment 8
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown