10.10 DAQ continues OK 
      Current file May2017/R26_17

      Detector biases; leakage currents OK - see attachment 1
      FEE64 Temperatures OK - see attachment 2
      good events; statistics OK - see attachment 3
      No warnings/errors reported by merger since DAQ GO - see attachment 4

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6)
      

10.17 E17/F11 ambient temperature +24.2 deg C, RH 42.8%, d.p. +10.7 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 70%)

      Lights on B2 partially off - Alvaro TD reports this may imply beam tests being carried out. He also
reports spike of gamma counts in BRIKEN clover around 10:00.

10.18 DAQ stops OK
      Current file May2017/R26_17

      Zeroed histograms. Background alpha calibration long run ongoing.

      ASIC settings 2017Mar27-16.12.39 *except*
      slow comparator 0x64
      LEC/MEC fast comparator 0x20

      BNC PB-4 settings 
      Amplitude 90,000
      x5 attenuator IN
      t_r 50ns, tau_d 50us
      polarity -
      rate 250Hz range
      delay MIN, tail pulse

10.25 DAQ stars OK
      Current file may2017/R27

      ttyUSB7 (nnaida1) attached

10.50 Measured AIDA ac mains voltage with DMM. Voltage 100.4V rms L-N
      FL11006 chiller refilled (2 litres added) 

17.05 DAQ continues OK 
      Current file May2017/R26_17

      Detector biases; leakage currents OK - see attachment 6,7
      FEE64 Temperatures OK - see attachment 8
      good events; statistics OK - see attachment 9
      No warnings/errors reported by merger since DAQ GO - see attachment 10

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6)

17.07 E17/F11 ambient temperature +24.1 deg C, RH 39.8%, d.p. +9.5 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 95%)

      Left DAQ running on alpha background calibration run