AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Mar 30 09:18:12 2025
Author
*
:
Subject
*
:
13.38 DAQ continues OK Current file May2017/R27_49 Detector biases; leakage currents OK - see attachment 1 FEE64 Temperatures OK - see attachment 2 good events; statistics OK - see attachment 3 No warnings/errors reported by merger since DAQ GO - see attachment 4 *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6) 10.30 E17/F11 ambient temperature +23.8 deg C, RH 40.9%, d.p. +9.6 deg C Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%) 13:40 Stopped DAQ running on alpha background calibration run Current file May2017/R49 tyUSB7 log (nnaida1) attached 13:43 Detector bias OFF 14.16 DAQ starts File May2017/R28 Pulser walkthrough BNC PB-4 Amplitude 90,000-10,000 @ 10,000 step x5 attenuator IN t_r 100ns tau_d 50us - polarity frequency 250Hz range delay MIN, tail pulse, INT ref ASIC settings 2017Mar27-16.12.39 *except* slow comparator 0x0a LEC/MEC fast comparator 0x20 See attachment 6 14.25 DAQ stop OK 14.27 DAQ starts File May2017/R29 Pulser walkthrough BNC PB-4 Amplitude 12,000-2,000 @ 2,000 step ASIC settings 2017Mar27-16.12.39 *except* slow comparator 0x0a LEC/MEC fast comparator 0x20 See attachment 7 14.34 DAQ stop OK 14.38 DAQ starts File May2017/R30 Background, pulser OFF ASIC settings 2017Mar27-16.12.39 *except* slow comparator 0x0a LEC/MEC fast comparator 0x20 15.16 DAQ stop OK May2017/R30_8 16:17 DAQ starts okay current run May2017/R31_0 leakage current and temperature fine see attachment 8 and 9
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown