AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Mar 30 09:19:12 2025
Author
*
:
Subject
*
:
> 13.38 DAQ continues OK > Current file May2017/R27_49 > > Detector biases; leakage currents OK - see attachment 1 > FEE64 Temperatures OK - see attachment 2 > good events; statistics OK - see attachment 3 > No warnings/errors reported by merger since DAQ GO - see attachment 4 > > *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (=6) > > 10.30 E17/F11 ambient temperature +23.8 deg C, RH 40.9%, d.p. +9.6 deg C > Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%) > > 13:40 Stopped DAQ running on alpha background calibration run > Current file May2017/R49 > tyUSB7 log (nnaida1) attached > > 13:43 Detector bias OFF > > 14.16 DAQ starts > File May2017/R28 > > Pulser walkthrough > > BNC PB-4 > Amplitude 90,000-10,000 @ 10,000 step > x5 attenuator IN > t_r 100ns tau_d 50us > - polarity > frequency 250Hz range > delay MIN, tail pulse, INT ref > > ASIC settings 2017Mar27-16.12.39 *except* > slow comparator 0x0a > LEC/MEC fast comparator 0x20 > > See attachment 6 > > 14.25 DAQ stop OK > > 14.27 DAQ starts > File May2017/R29 > > Pulser walkthrough > > BNC PB-4 > Amplitude 12,000-2,000 @ 2,000 step > > ASIC settings 2017Mar27-16.12.39 *except* > slow comparator 0x0a > LEC/MEC fast comparator 0x20 > > See attachment 7 > > 14.34 DAQ stop OK > > 14.38 DAQ starts > File May2017/R30 > > Background, pulser OFF > > ASIC settings 2017Mar27-16.12.39 *except* > slow comparator 0x0a > LEC/MEC fast comparator 0x20 > > 15.16 DAQ stop OK > May2017/R30_8 > > 16:17 DAQ starts okay > current run May2017/R31_0 > leakage current and temperature fine > see attachment 8 and 9 > > >
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown