AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:17:36 2025
Author
*
:
Subject
*
:
> 00:02 Bias and leakage currents ok - attachment one > System wide check all ok > FEE64 Temperatures OK - see attachment 2 > good events; statistics OK - see attachment 3 > ASIC load check all ok > Merger still running ok - attachment 4 > > 00:15 Current AIDA file R34_126 > > 00:24 Pb Wall is removed > Variable degraders in place Current configuration > 1mm Al - Out > 1mm Al - Out > 1mm Al - Out > > Fixed Degrader in place 11m Al (8mm +3mm Plates) > > 00:40 Variable degraders were out of alignment. > Have now been realigned. > > 01:06 Fixed degrader moved closer to F11 plastic. > Moved from far side of Pb wall to side closest to F11 plastic. > Fixed degrader thickness increased to 13mm Al (8mm + 3mm + 2mm plates) > > Current degrader configuration: > > Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates) > Variable degraders > 1mm Al - Out > 1mm Al - Out > 1mm Al - Out > > 01:36 Implant hit pattern for current Ni setting - attachment 5 > Looks as if we have a broken bond wire in DSSD6 FEE 8 (Missing horizontal band) > Also maybe one in DSSD3 FEE 14 (Missing vertical band) > > 01:54 Degraders changed > Current degrader configuration: > > Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates) > Variable degraders > 1mm Al - in > 1mm Al - in > 1mm Al - in > Implant Hit spectra - attachment 6 > > 01:59 Degraders changed > Current degrader configuration: > > Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates) > Variable degraders > 1mm Al - in > 1mm Al - out > 1mm Al - out > Implant Hit spectra - attachment 7 > > 02:08 Start AIDA file R1_0 in directory RIBF127R1 > BNC PB-4 > Amplitude 90,000 > x5 attenuator IN > t_r 100ns tau_d 50us > - polarity > frequency 25Hz range > delay MIN, tail pulse, INT ref > > ASIC settings 2017Mar27-16.12.39 > > Current degrader configuration: > > Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates) > Variable degraders > 1mm Al - in > 1mm Al - out > 1mm Al - out > > 02:11 Bias and leakages all ok - attachment 8# > > 02:26 Briken and BigRIPS start new runs > Briken run 3 > BigRIPS run 1003 > Current AIDA file R1_4 > > 02:42 MIDAS sort crashed, restarted and sorted R1_7 to get the implant rates: > *** DSSSD # 1 count: 428279 old count: 369602 dt: 1.02 s LEC rate: 57547.23 Hz > *** DSSSD # 2 count: 523171 old count: 452321 dt: 1.02 s LEC rate: 69485.85 Hz > *** DSSSD # 3 count: 194416 old count: 168097 dt: 1.02 s LEC rate: 25812.25 Hz > *** DSSSD # 4 count: 181257 old count: 156583 dt: 1.02 s LEC rate: 24198.93 Hz > *** DSSSD # 5 count: 73675 old count: 63323 dt: 1.02 s LEC rate: 10152.68 Hz > *** DSSSD # 6 count: 130418 old count: 112563 dt: 1.02 s LEC rate: 17511.22 Hz > *** DSSSD # 1 count: 63 old count: 54 dt: 1.02 s HEC rate: 8.83 Hz > *** DSSSD # 2 count: 156 old count: 133 dt: 1.02 s HEC rate: 22.56 Hz > *** DSSSD # 3 count: 199 old count: 178 dt: 1.02 s HEC rate: 20.60 Hz > *** DSSSD # 4 count: 196 old count: 174 dt: 1.02 s HEC rate: 21.58 Hz > *** DSSSD # 5 count: 180 old count: 152 dt: 1.02 s HEC rate: 27.46 Hz > *** DSSSD # 6 count: 87 old count: 75 dt: 1.02 s HEC rate: 11.77 Hz > > 02:59 BigRIPS and BRIKEN stopping the run > Ni being implanted into detector 6 so will be increasing degrader > AIDA current run R1_13 > > Current degrader configuration: > > Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates) > Variable degraders > 1mm Al - in > 1mm Al - in > 1mm Al - out > > 03:03 BRIKEN start run 4 > BigRIPS start run 1004 > > 03:16 Bias and leakage currents ok - attachment 9 > System wide checks all ok > > 03:23 Sorted file R1_16 - Current rates are: > *** DSSSD # 1 count: 191573 old count: 124591 dt: 1.04 s LEC rate: 64370.77 Hz > *** DSSSD # 2 count: 232369 old count: 148461 dt: 1.04 s LEC rate: 80636.92 Hz > *** DSSSD # 3 count: 84277 old count: 53763 dt: 1.04 s LEC rate: 29324.44 Hz > *** DSSSD # 4 count: 78592 old count: 51020 dt: 1.04 s LEC rate: 26497.13 Hz > *** DSSSD # 5 count: 30254 old count: 19685 dt: 1.04 s LEC rate: 10156.98 Hz > *** DSSSD # 6 count: 55682 old count: 36607 dt: 1.04 s LEC rate: 18331.38 Hz > *** DSSSD # 1 count: 55 old count: 33 dt: 1.04 s HEC rate: 21.14 Hz > *** DSSSD # 2 count: 103 old count: 60 dt: 1.04 s HEC rate: 41.32 Hz > *** DSSSD # 3 count: 77 old count: 47 dt: 1.04 s HEC rate: 28.83 Hz > *** DSSSD # 4 count: 72 old count: 45 dt: 1.04 s HEC rate: 25.95 Hz > *** DSSSD # 5 count: 29 old count: 20 dt: 1.04 s HEC rate: 8.65 Hz > *** DSSSD # 6 count: 4 old count: 3 dt: 1.04 s HEC rate: 0.96 Hz > > 04:01 BigRIPS and BRIKEN finish their runs > AIDA run R1_28 > > 04:04 BigRIPS run 1005 > BRIKEN run 5 > AIDA file R1_28 > > 04:28 System wide checks all ok > FEE temperatures ok > > 04:48 Implant hit spectra for the current degrader settings - attachment 10 > Current degrader configuration: > > Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates) > Variable degraders > 1mm Al - in > 1mm Al - in > 1mm Al - out > > 05:00 BigRIPS and BRIKEN stop their runs > Current AIDA file R1_42 > > ASIC load check all ok > > 05:01 BigRips starts run 1006 > BRIKEN run 6 > AIDA file R1_42 > > 05:03 System wide checks all ok > FEE temps ok - attachment 11 > Good Events - attachment 12 > leakages and bias ok - attachment 13 > > 05:37 No beam > > 05:40 beam back (Interlock error caused beam to be lost) > > 05:59 Appears to be a broken wire in DSSD2 FEE2 > > 06:00 BigRIPS and BRIKEN stopped their runs > AIDA currently on file R1_56 > > 06:02 BigRIPS starts run 1007 > BRIKEN starts run 7 > AIDA currently on file R1_57 > > 06:06 System wide checks all ok > FEE temperatures all ok > > 06:27 Leakage currents still rising but within acceptable range at the moment - attachment 14 > > 06:48 Rates from R1_67 > *** DSSSD # 1 count: 229047 old count: 159366 dt: 1.02 s LEC rate: 68643.03 Hz > *** DSSSD # 2 count: 275255 old count: 189329 dt: 1.02 s LEC rate: 84646.04 Hz > *** DSSSD # 3 count: 102832 old count: 70928 dt: 1.02 s LEC rate: 31428.76 Hz > *** DSSSD # 4 count: 93609 old count: 66189 dt: 1.02 s LEC rate: 27011.55 Hz > *** DSSSD # 5 count: 37256 old count: 26588 dt: 1.02 s LEC rate: 10509.09 Hz > *** DSSSD # 6 count: 69611 old count: 50443 dt: 1.02 s LEC rate: 18882.47 Hz > *** DSSSD # 1 count: 84 old count: 61 dt: 1.02 s HEC rate: 22.66 Hz > *** DSSSD # 2 count: 132 old count: 106 dt: 1.02 s HEC rate: 25.61 Hz > *** DSSSD # 3 count: 105 old count: 77 dt: 1.02 s HEC rate: 27.58 Hz > *** DSSSD # 4 count: 102 old count: 76 dt: 1.02 s HEC rate: 25.61 Hz > *** DSSSD # 5 count: 44 old count: 32 dt: 1.02 s HEC rate: 11.82 Hz > *** DSSSD # 6 count: 8 old count: 5 dt: 1.02 s HEC rate: 2.96 Hz > > 07:00 BigRips and BRIKEN stop their daqs > AIDA currently on file R1_71 > ASIC load check all ok > > 07:02 BigRIPS and BRIKEN start > BigRIPS run 1008 > BRIKEN run 8 > > System wide checks all ok > AIDA run R1_71 > > 07:30 Bias and leakage currents ok - attachment 15 > Leakage currents decreasing again > > 07:37 Rates from R1_79 > *** DSSSD # 1 count: 168930 old count: 115510 dt: 1.04 s LEC rate: 51415.14 Hz > *** DSSSD # 2 count: 203546 old count: 141908 dt: 1.04 s LEC rate: 59324.72 Hz > *** DSSSD # 3 count: 74562 old count: 52397 dt: 1.04 s LEC rate: 21333.14 Hz > *** DSSSD # 4 count: 70487 old count: 47585 dt: 1.04 s LEC rate: 22042.48 Hz > *** DSSSD # 5 count: 26901 old count: 18574 dt: 1.04 s LEC rate: 8014.49 Hz > *** DSSSD # 6 count: 51567 old count: 34847 dt: 1.04 s LEC rate: 16092.50 Hz > *** DSSSD # 1 count: 56 old count: 34 dt: 1.04 s HEC rate: 21.17 Hz > *** DSSSD # 2 count: 84 old count: 51 dt: 1.04 s HEC rate: 31.76 Hz > *** DSSSD # 3 count: 83 old count: 52 dt: 1.04 s HEC rate: 29.84 Hz > *** DSSSD # 4 count: 85 old count: 50 dt: 1.04 s HEC rate: 33.69 Hz > *** DSSSD # 5 count: 27 old count: 16 dt: 1.04 s HEC rate: 10.59 Hz > *** DSSSD # 6 count: 9 old count: 8 dt: 1.04 s HEC rate: 0.96 Hz > > 08:00 BigRIPS and BRIKEN stop their daqs > AIDA file R1_85 > > 08:02 BigRIPS and BRIKEN start DAQs > BigRIPS run 1009 > BRIKEN run 9 > AIDA file R1_86 > > 08:06 System wide checks all ok > FEE temperatures ok > > 08:19 Bias and leakages ok - attachment 16
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown