08.58 DAQ continues OK 
      File RIBF127R1/R1_99
      BigRIPS run 1009
      BRIKEN run 9

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

08.59 *online* analysis - ADC & disc data synchronised - see attachment 1
      analysis of R1_99 OK - see attachment 2 - deadtime <0.5%

09.11 BigRIPS & BRIKEN DAQ stop

      
09.13 AIDA RIBF127R1/R1_103
      BRIKEN 10
      BigRIPS 1010

      Fixed Degrader in place 13m Al (8mm + 3mm + 2mm Plates)
      Variable degraders
           1mm Al - in
           1mm Al - in
           1mm Al - out

09.30 Detector biases; leakage currents OK - see attachments 3 & 4
      FEE64 Temperatures OK - see attachment 5
      good events; statistics OK - see attachment 6
      No warnings/errors reported by merger since DAQ GO - see attachment 7

      *all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)

09.50 layout 1-8 spectra - see attachments 8-17
      Note pulser amplitude drifting for + polarity

      *all* spectra zero'd

10.00 BigRIPS & BRIKEN DAQ stop
      AIDA RIBF127R1/R1_114

      Check ASIC control x2

10.03 AIDA RIBF127R1/R1_115
      DAQ start BRIKEN 11
      DAQ start BigRIPS 1011

11.12 Changing degraders (16 mm Al plate check?)
      E17/F11 ambient temperature +24.7 deg C, RH 38.7%, d.p. +9.7 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 70%)
      HEC plot attached - see attach 8 

11.17 AIDA RIBF127R1/R1_132
      DAQ start BRIKEN 12
      DAQ start BigRIPS 1012
      Attempted to start new run. Lost beam. BigRIPS re-optimising

11.40 Found beam

      Zero'd all histograms 
      Cleared online sorting histograms

      AIDA RIBF127R1/R1_139
      DAQ start BRIKEN 13
      DAQ start BigRIPS 1013

12.14 Machine is down on AIDA run RIBF127R1/R1_145
      HEC plot attached - see attach 9
      Implants moved one detector upstream

12.24 Check ASIC Control x2

12.30 Beam back
      
12.31 AIDA RIBF127R1/R1_149
      DAQ start BRIKEN 14
      DAQ start BigRIPS 1014

12.35 Detector biases; leakage currents OK - see attachments 22 & 23
      *online* analysis - ADC & disc data synchronised
      analysis of R1_149 OK - see attachment 24 - deadtime <0.5%

12.39 Beam off RIBF127R1/R1_151
      SRC cooling issues

13.55 Background run
      AIDA RIBF127R1/R1_170
      DAQ start BRIKEN 15, BigRIPS 1015

14.01 Beam still off

14.20 Stop background run
      AIDA RIBF127R1/R1_175

15.30 Beam still off
      DAQ continues OK
      FEE64 temperatures OK - attach 24
      Statistics OK - attach 25
      Leakage currents OK - attach 26
      No merger errors. No nnaida panics from USB console terminal.