ELOG AIDA

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

AIDA

Fields marked with * are required
Entry time:	Sat Mar 29 12:29:02 2025
Author*:
Subject*:
> 16:43 Leakage currents OK - see attachment 1 > FEE64 temperatures OK - see attachment 2 > Statistics show rate increase in nnaida13, 21. Reason unclear - see attachment 3 > Waveforms for nnaida13 look OK - see attachment 4 > No merger errors - see attachment 5 > > All system-wide checks OK, except ADC calibration for nnaida1, 8, 19 > > Current writing speed 10 Mb/s, 30% higher than before - see attachment 6 > > Current AIDA run /TapeData/RIBF128/R5_6 > > 17:50 Leakage currents OK - see attachment 7 > FEE64 temperatures OK - see attachment 8 > Statistics as before - see attachment 9 > No merger errors - see attachment 10 > > Analysed /TapeData/RIBF128/R5_25 - attachment 11 > Rate high as expected, no timewarps, negligible dead time, idle time in agreement with dead time > > > 19.34 DAQ starts > AIDA file RIBF128/R5_58 > BigRIPS file 2088 > BRIKEN file 0 > > BNC PB-4 > Amplitude 90,000 > x5 attenuator IN > t_r 100ns tau_d 50us > - polarity > frequency 25Hz range > delay MIN, tail pulse, INT ref > > ASIC settings 2017Mar27-16.12.39 > > 130Ag BigRIPS setting, degrader setting - fixed 6mm (in F11) + variable all out = 6 mm Al > > 19.38 DAQ stops > AIDA file RIBF128/R5_59 > > 20.04 Detector biases & leakage currents OK - see attachments 12 & 13 > FEE64 Temperatures OK - see attachment 14 > good events statistics OK - see attachment 15 > No warnings/errors reported by merger since DAQ GO - see attachment 16 > > all system wide checks OK (zero fails) > > analysis of file RIBF128/R5_67 - dead time < 0.5%, no timewarps, 2 MBS timewarps - see attachment 17 > > 20.14 online analysis - ADC & disc data synchronised - see attachment 18 > > 20.28 layout spectra - attachments 19-28 > no pulser peaks observed in p+n junction strip FEE64s - to be checked when access is obtained > > 21.01 E17/F11 ambient temperature +24.3 deg C, RH 41.0%, d.p. +10.0 deg C > Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%) > > 21.07 DAQ starts > AIDA file RIBF128/R5_85 > BigRIPS file 3003 > BRIKEN file 3 > > BNC PB-4 > Amplitude 90,000 > x5 attenuator IN > t_r 100ns tau_d 50us > - polarity > frequency 25Hz range > delay MIN, tail pulse, INT ref > > ASIC settings 2017Mar27-16.12.39 > > 130Ag BigRIPS setting, degrader setting - fixed 2mm Al at F7, fixed 3mm + variable 1mm Al at F11 = 6 mm Al > > 21.15 DAQ stop > AIDA file RIBF128/R5_88 > > 21.31 DAQ starts > AIDA file RIBF128/R5_93 > BigRIPS file 3004 > BRIKEN file 4 > > DAQ sync check OK > > All SortSas spectra & histograms zero'd > > 21.45 DAQ stop > AIDA file RIBF128/R5_98 > > 21.31 DAQ starts > AIDA file RIBF128/R5_98 > BigRIPS file 3005 > BRIKEN file 5 > > 22.00 Detector biases & leakage currents OK - see attachments 29 & 30 > FEE64 Temperatures OK - see attachment 31 > good events statistics OK - see attachment 32 > No warnings/errors reported by merger since DAQ GO - see attachment 33 > > all system wide checks OK (zero fails) > > analysis of file RIBF128/R5_67 - dead time < 0.7%, no timewarps, 1 MBS timewarp - see attachment 34 > > 20.14 online analysis - ADC & disc data synchronised - see attachment 35 > > 22.08 offline analysis file RIBF128/R5_106 - rates > > * DSSSD # 1 count: 403476 old count: 321247 dt: 1.03 s LEC rate: 80056.89 Hz > * DSSSD # 2 count: 559009 old count: 446189 dt: 1.03 s LEC rate: 109839.82 Hz > * DSSSD # 3 count: 262328 old count: 206447 dt: 1.03 s LEC rate: 54404.88 Hz > * DSSSD # 4 count: 159863 old count: 127957 dt: 1.03 s LEC rate: 31063.19 Hz > * DSSSD # 5 count: 66930 old count: 52878 dt: 1.03 s LEC rate: 13680.81 Hz > * DSSSD # 6 count: 109482 old count: 87597 dt: 1.03 s LEC rate: 21306.90 Hz > * DSSSD # 1 count: 1 old count: 1 dt: 1.03 s HEC rate: 0.00 Hz > * DSSSD # 2 count: 72 old count: 56 dt: 1.03 s HEC rate: 15.58 Hz > * DSSSD # 3 count: 278 old count: 214 dt: 1.03 s HEC rate: 62.31 Hz > * DSSSD # 4 count: 218 old count: 178 dt: 1.03 s HEC rate: 38.94 Hz > * DSSSD # 5 count: 22 old count: 18 dt: 1.03 s HEC rate: 3.89 Hz > * DSSSD # 6 count: 27 old count: 15 dt: 1.03 s HEC rate: 11.68 Hz > > online analysis - per DSSSD x versus y (HEC) - attachment 36 > per DSSSD E_p versus E_n (HEC) - attachment 37 > > offline analysis file RIBF128/R5_106 - ADC & disc data synchronised - attachment 38 > N.B. pulser to p+n strips appears to be low amplitude - absence of secondary ADC peak, low multiplicity for > disc data > > > 23.01 DAQ stop > AIDA file RIBF128/R5_124 > > 23.02 DAQ starts > AIDA file RIBF128/R5_124 > BigRIPS file 3006 > BRIKEN file 6 > > 00:01 DAQ stop > AIDA file R5_145 Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown