AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:28:08 2025
Author
*
:
Subject
*
:
> 02.37 DAQ stalled - USB-controlled ac mains relay fuse blown > Not writing to disk > > BNC PB-4 > Amplitude 90,000 > x5 attenuator IN > t_r 100ns tau_d 50us > - polarity > frequency range 25Hz > delay MIN, tail pulse, INT ref > > ASIC settings 2017Oct23-14.38.03 > *all* FEE64s slow comparators 0xa > > Detector biases & leakage currents OK - see attachments 1 & 2 > *all* system wide checks OK *except* nnaida21 fails ADC calibration > Ambient temperature +24.3 deg C, d.p. +8.7 deg C, RH 37.1% > > 02.54 Replace 250V/16A fuse and power up > > FEE64 Temperatures OK - see attachment 3 > good events statistics stable & OK - see attachments 4 > > 03:30 Stats with nnaida13 slow comparator threshold raised to 140keV - Attachment 5 > > 03:50 Pulser widths done, slow comparator threshold raised to 0xc ~120keV for nnaida 19-22 > Statistics - Attachment 6 > > 05:40 Beam now going into F11. Wasabi and YSol in front of AIDA > AIDA is seeing light particles > Waveforms look good > Layout 7 - Attachment 7 > layout 8 - Attachment 8 > Statistics with light particles going through - Attachment 9 > Bias and leakage currents ok - Attachment 10 > > We are taking the light ion data to file in R17_* > > 06:50 Light ion data continues > System wide checks all ok > > 07:22 Bias and leakage ok - Attachment 11 > FEE Temperatures ok - Attachment 12 > Stats - Attachment 13 > > 08:15 Light ions stop still writing file > > 08:27 Beam into aida run R17_30 > Zero degrader, just 4mm of WAS3ABI > WAS3ABI run 120 > BRIKEN started run at 08:27 run 18 > BIGRIPS Run 8 > Timestamp reset at 08:27 > Stats with beam - Attachment 14 > > 08:44 Waveforms with implants in the detector > Layout 7 - Attachments 15 & 16 > Layout 8 - Attachments 17 & 18 > Layout 1 linear and log attachments 19 & 20 > Leakage and bias ok - Attachment 21 > > 09:14 Just noticed the stats in nnaida13 has dropped rate. Noise source may have been turned off > Statistics - Attachment 22 > > Spectra from the 0mm degrader run - Attachments 22-27 > > 09:20 BRIKEN and WAS3ABI stop on run 162 aida on R17_35 > 1mm degrader moved in > BigRIPS on run 9 > BRIKEN run 19 > WAS3ABI start on 163 > AIDA on R17_35 > > Rates similar to last screenshot of stats 09:14 > > 09:26 Leakage and bias ok - Attachment 28 > > 09:41 Beam stops > AIDA on file R17_37 > BRIKEN stops running > WAS3ABI on run 178 > > AIDA Files written > -rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:22 R17_29 > -rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:31 R17_30 > -rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:40 R17_31 > -rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 08:50 R17_32 > -rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:00 R17_33 > -rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:10 R17_34 > -rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:21 R17_35 > -rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:31 R17_36 > -rw-rw-rw-. 1 npg npgstaff 2.0G Oct 26 09:42 R17_37 > -rw-rw-rw-. 1 npg npgstaff 329M Oct 26 09:44 R17_38
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown