19.03 DAQ started OK - data transfer not enabled

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa

      Detector biases & leakage currents OK - see attachments 1
      FEE64 Temperatures OK - see attachment 2
      DAQ statistics OK - see attachment 3
      *all* system wide checks OK *except* nnaida7 fails ADC calibration
      Rate look OK. A few dropped channels. See attach 4
      Waveforms look OK. Noise at reasonable levels. See attach 5 & 6

19:15 Started run Nov17/R1
      Kbyte/sec written 2611
      Merger data rate 346210 items/sec

19:26 Observed increase in rate in asics nnaida13, 19 (>50 000)
      Noise profile looks typical. See waveforms - attach 7,8
      Increased FEE64 slow comparators for nnaida 13, 19 from 0xa to 0xc
      Rate decreases significantly. See attach 9

19.40 Beam on
      BigRIPS 115Nb setting
      WAS3ABI + YSO

      Good Event, merger and data rates OK - see attachments 10-12
      8x FEE64s <10k
      8x FEE64s 10-20k
      6x FEE64s 20-30k
      2x FEE64s 30-40k

19.57 per FEE64 1.8.W spectra (2ms FSR) - see attachments 14-15

20.06 per FEE64 1.8.L spectra - see attachments 16-17
      nnaida17 67 ch FWHM
      nnaida8  73 ch FWHM

20.50 DAQ starts

RIKEN run: 005
Wasabi Run: 4048
BigRIPS run: 2057
AIDA run R2_0
Listmode DLT file:171117_2050_115Nb_005.dlt

BRIKEN Rate (h:12): ~ 42 cps
F11 Rate (h:18): ~ 37 cps
CLOVERS Rate (h:15): ~ 33 cps
AIDA Veto Plastic Rate (h:19): ~ 23

      WAS3ABi in
      YSO removed
      AIDA inserted to HPGe clover cryostat position

      BigRIPS 115Nb setting
      Degrader 5mm Al

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency range 25Hz
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Oct23-14.38.03
      *all* FEE64s slow comparators 0xa *except* nnaida13 0xf, nnaida19 0xc, nnaida20-21 0xb

20.57 all spectra zero'd

      Good Event stats - see attachment 18
      7x FEE64s <10k
      5x FEE64s 10-20k
      4x FEE64s 20-30k
      4x FEE64s 30-40k
      3x FEE64s 40-50k
      1x FEE64 >50k (nnaida13 73k)



21.22 Not all ASICs settings restored from 2017Oct23-14.38.03
      Some p+n FEE64s Ibias LF feedback 0x8 *not* 0xf as expected - now changed manually
      AIDA data file Nov17/R2_5

      ASIC settings saved to 2017Nov17-21.24.47
      Updated options

21.33 New BigRIPS, BRIKEN, WAS3ABi files started
      AIDA continues from R2_6

Date: 17/11/017
Start: 2133
RIKEN run: 006
Wasabi Run: 4061
BigRIPS run: 2058
AIDA run R2_06
Listmode DLT file:171117_2132_115Nb_006.dlt

BRIKEN Rate (h:12): ~ 42 cps
F11 Rate (h:18): ~ 37 cps
CLOVERS Rate (h:15): ~ 33 cps
AIDA Veto Plastic Rate (h:19): ~ 23


21.40 Detector biases & leakage currents OK - see attachments 19 & 20
      FEE64 Temperatures OK - see attachment 21
      DAQ statistics OK - see attachment 22
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

      per FEE64 1.8.* spectra (20ms FSR) see attachments 23 & 24
      p+n spectra now look OK with Ibias LF feedback changed from 0x8 to 0xf
      note 3kHz appears in nnaida19, 21 & 22

22.41 DAQ stop
      AIDA data file Nov17/R2_15

      *use R2_8 - R2_15* for offline analysis

22.50 AIDA withdrawn from BRIKEN
      YSO re-installed

23.10 Detector biases & leakage currents OK - see attachments 25 & 26
      FEE64 Temperatures OK - see attachment 27
      DAQ statistics OK - see attachment 28
      7x FEE64s <10k
      4x FEE64s 10-20k
      8x FEE64s 20-30k
      2x FEE64s 30-40k
      2x FEE64s 40-50k
      1x FEE64 >50k (nnaida13 64k)
      *all* system wide checks OK *except* nnaida7 fails ADC calibration

      per FEE64 1.8.W spectra (20ms FSR) - see attachments 29 & 30
      per FEE64 rate spectra linear and log scales - see attachments 31 & 32

23.30 all spectra zero'd