AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Apr 26 02:28:59 2015
Author
*
:
Subject
*
:
Upstream, 207Bi source DSSSD #1 nnaida 6 & 9 (p+n), nnaida 11 & 16 (n+n) DSSSD #2 nnaida 2 & 5 (p+n), nnaida 4 & 7 (n+n) DSSSD #3 nnaida 1 & 14 (p+n), nnaida 3 & 8 (n+n) N/C nnaida 10 & 13 (p+n), nnaida 12 & 15 (n+n) 3x MSL type BB18(DS)-1000 DSSSDs connected via 12x flexible Kapton PCB cables to 8x adaptor PCBs Hit patterns show attachments 1-16 Default ASIC parameters *except* slow comparator 0x10 -> 0x20 Example ASIC configuration attachment 17 Example 'Good Events' statistics attachment 18 ASIC #1 waveforms of nnaida 1 - 16 enabled Example waveform for p+n and n+n strips of each DSSSD attachments 19-24 Parameters saved to: /MIDAS/DB/EXPERIMENTS/AIDA/2015Apr26-10.56.40 12.10 Removing bias gnd jumper from p+n adaptor PCBs increases amplitude of ~100kHz RFI/EMI (attachment 25) 15.20 Reduce DSSSD configuration to 1x DSSSD using 4x adaptor PCBs + heavy duty copper braid DSSSD #2 nnaida 2 & 14 (p+n), nnaida 4 & 7 (n+n) attachments 26-33 show example preamp traces and ASIC#1 spectra similar stability/performance to previous tests with a single DSSSD, typical pulser peak widths ~130-200 ch FWHM AIDA snout drain wire - no obvious difference if connected, or not (as before) 15.40 DSSSD configuration 2x DSSSD using 8x adaptor PCBs DSSSD #2 nnaida 2 & 14 (p+n), nnaida 4 & 7 (n+n) + heavy duty copper braid DSSSD #1 nnaida 6 & 10 (p+n), nnaida 11 & 16 (n+n) + black jumper cables from above adaptor PCBs to these adaptor PCBs Detector bias from N1419 and N1419B, i.e. separate NIM modules => separate floating grounds similar or improved performance to 1x DSSSD test, typical pulser peak widths ~115-250 ch FWHM 16.15 CG smartphone camera pictures of front end config 16.30 data to disk - file /Tapedata/May2015/R3_0.gz (BNC Pb-4 25Hz + 207Bi source) 17.30 Detector bias from N1419, i.e. both detector biases from same NIM module => same floating ground for both DSSSDs Similar performance to case above (separate NIM modules) 17.46 data to disk - file /Tapedata/May2015/R4_0.gz (BNC Pb-4 25Hz + 207Bi source)
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
1.png
Original size: 1425x1026
Attachment 2:
2.png
Original size: 1425x1026
Attachment 3:
3.png
Original size: 1425x1026
Attachment 4:
4.png
Original size: 1425x1026
Attachment 5:
5.png
Original size: 1425x1026
Attachment 6:
6.png
Original size: 1425x1026
Attachment 7:
7.png
Original size: 1425x1026
Attachment 8:
8.png
Original size: 1425x1026
Attachment 9:
9.png
Original size: 1425x1026
Attachment 10:
10.png
Original size: 1425x1026
Attachment 11:
11.png
Original size: 1425x1026
Attachment 12:
12.png
Original size: 1425x1026
Attachment 13:
13.png
Original size: 1425x1026
Attachment 14:
14.png
Original size: 1425x1026
Attachment 15:
15.png
Original size: 1425x1026
Attachment 16:
16.png
Original size: 1425x1026
Attachment 17:
17.png
Original size: 1425x1026
Attachment 18:
18.png
Original size: 1425x1026
Attachment 19:
1w.png
Original size: 1425x1026
Attachment 20:
4w.png
Original size: 1425x1026
Attachment 21:
5w.png
Original size: 1425x1026
Attachment 22:
8w.png
Original size: 1425x1026
Attachment 23:
9w.png
Original size: 1425x1026
Attachment 24:
11w.png
Original size: 1425x1026
Attachment 25:
9w-bias-jumper.png
Original size: 1425x1026
Attachment 26:
2w-1.png
Original size: 1425x1026
Attachment 27:
4w-1.png
Original size: 1425x1026
Attachment 28:
7w-1.png
Original size: 1425x1026
Attachment 29:
14w-1.png
Original size: 1425x1026
Attachment 30:
2-1.png
Original size: 1425x1026
Attachment 31:
4-1.png
Original size: 1425x1026
Attachment 32:
7-1.png
Original size: 1425x1026
Attachment 33:
14-1.png
Original size: 1425x1026
Attachment 34:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown