AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:16:16 2025
Author
*
:
Subject
*
:
> DSSSD #1 +100V, +3.8uA > DSSSD #2 +100V, +5.5uA > > 09.48 nnaida16 stalled at DAQ GO > see attachments 1 & 2 for statistics & lost activity monitors > > 1830: Current FEE configuration (looking downstream): > > | | | | > | x |nnaida25+26| x | > | | | | > | x |nnaida17+18| x | > | | | | > | x |nnaida9+10 | x | > | | | | > | x | nnaida1+2 | x | > > > |nnaida |nnaida |nniada |nnaida | |nnaida |nnaida |nniada |nnaida | > |27+28 |19+20 |11+12 |3+4 | |7+8 |15+16 |23+24 |31+32 | > > | | | | > | x | nnaida5+6 |nnaida13+14| > | | | | > | x | x | x | > | | | | > | x |nnaida21+22| x | > | | | | > | x |nnaida29+30| x | > > > Detector 1 (3131-11) is connected to nnaida 10, 11, 6, 16 > Detector 2 (3058-09) is connected to nnaida 2, 4, 14, 7 > Detector 3 (2977-20) is connected to nnaida 1, 3, 13, 8 > > 19.30 Check of AIDA alignment and positioning within EURICA > See attachments 4-8 > > 16.03 April 28 VP > adding data sources (ie FEE64s) into the system and rules for TCP ports > 1) FEE needs to have an entry in the DHCP configuration (/etc/dhcp/dhcp.conf) > This assigns a host name (nnaidaxx) to the FEE based on ethernet MAC address and assigns an IP address > 10.1.1.xx or 10.1.2.xx > Also copy an existing file system in /MIDAS/XilinxLinux/ppc_4xx/rfs for nnaidaxx. This MUST be done as root > to preserve important file properties. (Use the existing tar file) > 2) The file /MIDAS/linux-ppc_4xx/startup/nnaidaxx assigns xx as the AIDA Module Number and destination IP > port for created data. In this example xx = 22. > > netstring TS_Server "myserver" > netint TS_Port 11022 > netstring TS2_Server "myserver" > netint TS2_Port 11122 > > netint Aida_ModuleNum 22 > > TS2_Server is currently not used > > So nnaidaxx will send data to port 110xx in the Merger > 3) Add nnaidaxx to the list of ACQSERVERS in /MIDAS/config/TclHttpd/aidas1/startup.tcl > 4) The Merger configuration file is /MIDAS/Merger/AIDA/GS_configuration > If the highest Aida ModuleNum is xx then modify the links definition so you have > links xx ./link64 11001 > Note that xx may be greater than the actual number of FEE modules if there are gaps in your name scheme > The highest enabled IP port will be (11001 + xx - 1) > You can enable/disable links to the Merge via the Merge GUI. > Note: nnaidaxx appears to the Merge link table as link (xx-1). So if you ask for 32 links they are > 0 => 31 in the Merge GUI table. > > > > > >
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown