AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:26:34 2025
Author
*
:
Subject
*
:
> 14:25 Moved from 8x DSSD setup to 6x DSSD > Top two detectors removed. > Detector alignments in snout unchanged so can use the 6xDSSD mark from June 2018 > > Rev F adapter cards have been put in place for all backside FEEs > All adapter boards are now Rev E or F > All adapter boards have an additional ground cable from the screw on the copper block to the lemo ground > connection > > Power on and detectors biased (Cabling changed to reflect new 1-6) > Leakage and bias ok - attachment 1 > System wide checks all ok > FEE temperatures ok - attachment 2 > > DAQ Started > Stats are looking very good - attachment 3 > Rates look ok (Lin and Log) - attachments 4 & 5 > > Front side waveforms look ok - attachment 6 > Backside waveforms look ok - attachment 7 > > Pulser widths are showing double peaking. - attachments 8 & 9 > we are not sure if this is down to the pulser or not > > Expanded timescales of the waveform, 0, 10, 100 and 1000 cycles > Layout 7 - attachments 10 - 14 > Layout 8 - attachments 15 - 18 > > 15:24 Pulser turned off in prep for alpha run > Slow comp set to 0x64 > > 15.42 DAQ start file Sep18/R2 > > Test and calibration using background alpha particles > > ASIC settings 2018Jun22-11.28.18 > *except* slow comparator 0xa -> 0x64 > > BNC PB-4 pulser OFF > > Merger c. 30k items/s TapeServer 230kb/s
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown