09.42 DAQ continues OK - current file Sep18/R2_36

09.42 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachment 4
      nnaida2 rate due to one hot channel

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6
      no errors or warnings shown by server terminal sessions 

      1.8.L spectra - see attachments 7 & 8
      1.8.W spectra 20us FSR - see attachments 9 & 10

09.46 ASIC check load (file Sep18/R2_36)
      Note for p+n junction strip FEE64s the 1.8.W spectra are only updating for nnaida2, 10 & 17 - these traces
look OK
      Other FEE64s show a noise transient and do not update - ASIC check load did not fix - probably requires
DAQ STOP/GO  

09.57 temperature +25.4 deg C, RH 39.2%, d.p. +10.6 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level c. 80%

13:17 FEE temperatures and system wide checks all ok
      Alpha run R2 stopped
      R2_0 -> R2_37

13:18 Thresholds set to 0xa from 0x64 for all FEEs and ASICs

13:22 R3_0 started
      Thresholds at 0xa and pulser on at 25Hz setting ~ 2Hz

      ASIC settings saved to EXPERIMENTS/AIDA/2018Oct03-13.26.58
      Merger screenshot - attachment 11
      Stats - attachment 12
      Layouts 7 and 8 - attachments 13 & 14 

13:31 R3_0 Stopped

13:34 R4_0 Started
      ASIC thresholds all at 0x9
      Merger screenshot - attachment 15
      Stats - attachment 16
      Layout 1 - attachment 17

13:38 R4_0 Stopped

13:40 R5_0 Started
      ASIC thresholds all at 0x8
      Merger screenshot - attachment 18
      Stats - attachment 19
      Layout 1 - attachment 20

13:45 R5_0 Stopped

13:49 R6_0 Started
      ASIC slow comp at 0x7
      Merger screenshot - attachment 21
      Stats - attachment 22
      Layout 1 - attachment 23

13:52 R6_1 Stopped

      R7_0 Started
      ASIC Slow comp at 0x6
      Merger screenshot - attachment 24
      Stats - attachment 25
      Layout 1 - attachment 26
      Tapeserver window screenshot - attachment 27
      Top window showing 72% CPU usage - attachment 28

15:06 Pulser measurements carried out with thresholds at 0xa
      Typical pulser peak width was ~70-80 with a couple above 100.
      Double peaking that was observed earlier in the week is no longer observed.
      Both in the FEEs and on a scope

      Backside pulser peaks - attachment 29
      Frontside pulser peaks - attachment 30