AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:37:01 2025
Author
*
:
Subject
*
:
09:13 DAQ still running R18_1 Merger and TapeServer OK System wide checks ok, except for nnaida7 ADC calibration failure Temperature OK (attachment 1) Bias and leakage current OK (attachment 2) Good event statistics OK (attachment 3) 11.20 1.8.W spectra - attachment 4 & 5 analysis file Oct18/R18_1 - attachment 6 15:35 Inserted AIDA snout in BRIKEN. Lowered threshold to 100 keV. Rate looks OK. R19 pulser walkthrough 90 0000 ... 10 0000 (10 000 steps) - attach 7&8 R21 pulser walkthrough 12 000 ... 2 000 (2 000 steps) Pulser back to 90 000. Frequency set to zero. R22 background run starts. Rates OK (attach 9) 16.07 Raised slow comparator threshold to 100 from 10 DAQ start (file R23) Merger and TapeServer ok, no error messages in terminal Good event statistics ok (attachment 10) System wide checks ok, except nnaida7 failing ADC calibration FEE64 temperatures ok (attachment 11) bias/leakage currents ok (attachment 12) 16.58 Repeat pulser walkthroughs with additional ASIC check loads R25 pulser walkthrough 90 0000 ... 10 0000 (10 000 steps) - attach 7&8 R26 pulser walkthrough 12 000 ... 2 000 (2 000 steps) 18.26 DAQ start - file Oct18/R27 alpha background LEC/MEC slow comparator 0xa -> 0x64 BNC PB-4 pulser OFF @ 18.29! 18.34 1.8.W spectra 20us FSR - see attachments 13 & 14
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown