AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:31:03 2025
Author
*
:
Subject
*
:
> 09:13 DAQ still running R18_1 > Merger and TapeServer OK > System wide checks ok, except for nnaida7 ADC calibration failure > Temperature OK (attachment 1) > Bias and leakage current OK (attachment 2) > Good event statistics OK (attachment 3) > > 11.20 1.8.W spectra - attachment 4 & 5 > > analysis file Oct18/R18_1 - attachment 6 > > > 15:35 Inserted AIDA snout in BRIKEN. Lowered threshold to 100 keV. Rate looks OK. > R19 pulser walkthrough 90 0000 ... 10 0000 (10 000 steps) - attach 7&8 > R21 pulser walkthrough 12 000 ... 2 000 (2 000 steps) > Pulser back to 90 000. Frequency set to zero. > R22 background run starts. > Rates OK (attach 9) > > 16.07 Raised slow comparator threshold to 100 from 10 > DAQ start (file R23) > Merger and TapeServer ok, no error messages in terminal > Good event statistics ok (attachment 10) > System wide checks ok, except nnaida7 failing ADC calibration > FEE64 temperatures ok (attachment 11) > bias/leakage currents ok (attachment 12) > > 16.58 Repeat pulser walkthroughs with additional ASIC check loads > > R25 pulser walkthrough 90 0000 ... 10 0000 (10 000 steps) - attach 7&8 > R26 pulser walkthrough 12 000 ... 2 000 (2 000 steps) > > > 18.26 DAQ start - file Oct18/R27 > alpha background > LEC/MEC slow comparator 0xa -> 0x64 > BNC PB-4 pulser OFF @ 18.29! > > 18.34 1.8.W spectra 20us FSR - see attachments 13 & 14
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown