AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:36:59 2025
Author
*
:
Subject
*
:
08:36 DAQ still running Not writing data to disk Bias and leakage currents ok - attachment 1 System wide checks all ok FEE Temperatures ok - attachment 2 Statistics - attachment 3 Check ASIC Control done 08:56 Pulser peaks are ok and similar to what has been observed over the past two weeks Layout 4 and 5 - attachments 4 and 5 11.55 Lost connection to FEE64 1-16 - fuse blown stopped DAQ switched all FEE64 off Replaced 20A fuse switched FEE64 back on individually system wide checks ok, except nnaida7 failure in ADC calibration DAQ start (not writing to file) FEE64 temperatures ok (attachment 6) Bias/Leakage currents ok (attachment 7) good event statistics ok (attachment 8) 17.08 all system wide checks OK *except* nnaida7 fails ADC calibration detector biases & leakage currents OK - see attachments 9 & 10 FEE64 temperatures OK - see attachment 11 good event statistics OK - see attachment 12 per FEE64 rate spectra - see attcahment 13 1.8.L spectra - see attachments 14 & 15 nnaida1 pulser peak width 72 ch FWHM 1.8.W spectra 20us FSR - see attachments 16 & 20 1.8.W spectra 200us FSR - see attachments 17 & 21 1.8.W spectra 2ms FSR - see attachments 18 & 22 1.8.W spectra 20ms FSR - see attachments 19 & 23
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown