AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:26:33 2025
Author
*
:
Subject
*
:
> 08:36 DAQ still running > Not writing data to disk > > Bias and leakage currents ok - attachment 1 > System wide checks all ok > FEE Temperatures ok - attachment 2 > Statistics - attachment 3 > Check ASIC Control done > > 08:56 Pulser peaks are ok and similar to what has been observed over the past two weeks > Layout 4 and 5 - attachments 4 and 5 > > 11.55 Lost connection to FEE64 1-16 - fuse blown > stopped DAQ > switched all FEE64 off > Replaced 20A fuse > switched FEE64 back on individually > system wide checks ok, except nnaida7 failure in ADC calibration > DAQ start (not writing to file) > FEE64 temperatures ok (attachment 6) > Bias/Leakage currents ok (attachment 7) > good event statistics ok (attachment 8) > > 17.08 all system wide checks OK *except* nnaida7 fails ADC calibration > detector biases & leakage currents OK - see attachments 9 & 10 > > FEE64 temperatures OK - see attachment 11 > good event statistics OK - see attachment 12 > > per FEE64 rate spectra - see attcahment 13 > > 1.8.L spectra - see attachments 14 & 15 > nnaida1 pulser peak width 72 ch FWHM > > 1.8.W spectra 20us FSR - see attachments 16 & 20 > 1.8.W spectra 200us FSR - see attachments 17 & 21 > 1.8.W spectra 2ms FSR - see attachments 18 & 22 > 1.8.W spectra 20ms FSR - see attachments 19 & 23
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown