AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:27:58 2025
Author
*
:
Subject
*
:
> > > 17:59 DAQ continues OK > Stats OK - attachment 1 > FEE temperatures OK - attachment 2 > Bias and leakage currents OK - attachment 3 > System-wide checks OK *except* nnaida7 fails ADC calibration > > > 19:07 DAQ continues OK > Stats OK - attachment 4 > FEE temperatures OK - attachment 5 > Bias and leakage currents OK - attachment 6 > System-wide checks OK *except* nnaida7 fails ADC calibration > > 20.19 DAQ starts > AIDA file RIBF148/R5_4 > BRIKEN file 16 > BigRIPS 1001 > > 165Pm setting + 3mm Al degrader > > 20.21 all online & MIDASsort histograms zero'd > > 20.23 FEE64 good event statistics - see attachment 7 > Merger - see attachment 8 > TapeServer - see attachment 9 > > HEC x versus y spectra - see attachment 10 > SN thinks DSSSD #3 are the ions of interest, #4 are the ions of interest at different charge state > and #5 & #6 are lighter ions which do not stop in DSSSD #1-6 > > 21.21 DAQ stops > > DAQ starts > AIDA file RIBF148/R5_14 > BRIKEN file 18 > BigRIPS 1003 > > 21.26 HEC x vs y multiplicity spectra - attachment 11 > > 21.29 HEC Ex vs Ey spectra - attachment 12 > FEE64 rate spectra - attachment 13 > > 21.31 1.8.L front/rear energy spectra (attachments 14/15) LEC > > 21.33 1.8.H front/rear energy spectra (attachments 16/17) HEC > > 21.46 system wide checks ok, except nnaida7 ADC calibration failure > FEE64 good event statistics ok (attachment 18) > FEE64 temperatures ok (attachment 19) > Leakage currents/detector bias ok (attachment 20) > > 21.49 Merger and TapeServer ok, no error messages in terminal > DAQ still running (RIBF148/R5_18) > > 22.10 attachment 21 - pulser spectra in all channels fired at same time > - FEE64 in sync > > 22.12 SYNC100 at 9153.8 Hz > FEE64 discriminator at ~15000 Hz - higher than expected > ~1 second deadtime in FEE19 - due to nnaida12 running fast > no timewarps observed in FEE64 > all of above in attachment 22 > > 22:32 DAQ continues OK > Stats OK - attachment 24 > FEE temperatures OK - attachment 23 > Bias and leakage currents OK - attachment 25 > System-wide checks OK *except* nnaida7 fails ADC calibration > > 23:30 DAQ continues OK > Stats OK - attachment 26 > FEE temperatures OK - attachment 27 > Bias and leakage currents OK - attachment 28 > System-wide checks OK *except* nnaida7 fails ADC calibration >
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown