AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Mar 30 09:18:09 2025
Author
*
:
Subject
*
:
16.44 DAQ continues OK - AIDA file RIBF148/R5_432 165Pm BigRIPS setting + 2.8mm Al degrader ASIC settings 2018Oct03-13.26.58 from c. 09.00 13.11.18 n+n FEE64s Ibias LF feedback 0xb -> 0xd HEC fast comparator threshold 0x20 -> 0xff BNC PB-4 pulser Amplitude 90,000, x5 attenuator IN t_r 50ns tau_d 1ms Frequency min Delay min 16.45 BigRIPS and BRIKEN stop AIDA on File R5_432 16.48 BigRIPS starts run 1047 BRIKEN starts run 62 AIDA on file R5_433 16.57 online MIDASsort m_p versus m_n (LEC) - attachment 1 x versus y (LEC) - attachment 2 E_p versus E_n (LEC) - attachment 3 m_p versus m_n (HEC) - attachment 4 x versus y (LEC) - attachment 5 E_p versus E_n (LEC) - attachment 6 all MIDASsort spectra zero'd 17.17 file RIBF128/R5_436 ADC data synchronised - attachment 7 analysis of RIBF148/R5_436 - attachment 8 max dead time nnaida19 ~0.25% 17.48 BigRIPS and BRIKEN stop AIDA on File R5_443 17.48 BigRIPS starts run 1048 BRIKEN starts run 63 AIDA on file R5_443 18.45 BigRIPS and BRIKEN stop AIDA on File R5_452 18.47 BigRIPS starts run 1049 BRIKEN starts run 64 AIDA on file R5_453 19.45 BigRIPS and BRIKEN stop AIDA on File R5_463 19.46 BigRIPS starts run 1050 BRIKEN starts run 65 AIDA on file R5_463 20.49 BigRIPS and BRIKEN stop AIDA on File R5_473 20.49 BigRIPS starts run 1051 BRIKEN starts run 66 AIDA on file R5_473 21.49 BigRIPS and BRIKEN stop AIDA on File R5_483 ASIC check load 21.50 BigRIPS starts run 1052 BRIKEN starts run 67 AIDA on file R5_484 22.00 all system wide checks OK *except* nnaida7 fails ADC calibration detector biases & leakage currents OK - see attachments 9 & 10 FEE64 temperatures OK - see attachment 11 good event statistics OK - see attachments 12 Merger OK - see attachment 13 TapeServer OK - see attachment 14 1x merger error message reported - trying to add items to Q index 12 (Link 12) but queue alreday full per FEE64 Rate spectra - attachment 15 1.8.L spectra - attachments 16 & 17 nnaida1 pulser peak width 73 ch FWHM 1.8.H spectra - attachments 18 & 19 1.8.W spectra 20ms FSR - attachments 20 & 21 22.48 BigRIPS and BRIKEN stop AIDA on File R5_493 22.50 BigRIPS starts run 1053 BRIKEN starts run 68 AIDA on file R5_493 23.24 BRIKEN DAQ found stopped - no sync check data - BigRIPS DAQ stopped and restarted AIDA on File R5_499 23.26 BigRIPS starts run 1054 BRIKEN starts run 69 AIDA on file R5_499
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown