AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:37:31 2025
Author
*
:
Subject
*
:
OH setup AIDA external clock using Tektronix AFG3102 - settings as follows CH1 ON - amplitude +5V, phase 0n deg, offset 0V, frequency 50.000000MHz JA setup DTAS/BigRIPS clock using Tektronix AFG3102 - settings as follows CH2 ON - amplitude -0.8V, phase 0n deg, offset 0V, frequency 25.000000MHz Unfortunately the AGF3102 was set to CH1 frequency = CH2 frequency and this changed the AIDA external clock frequency from 50MHz to 25MHz. This stopped the DAQ. Interestingly it was possible to Resync successfully and *all* system wide checks were OK *except* Check Clock Status which produced errors - see attachment 1. CH1 & CH2 now set to 50MHz and 25MHz respectively. AIDA DAQ now running OK.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown