ELOG AIDA

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

AIDA

Fields marked with * are required
Entry time:	Sat Mar 29 12:37:18 2025
Author*:
Subject*:
10:28 DAQ Continues ok Alpha run continues - Currently on file R7_5 System wide checks all ok leakage currents are up from yesterday - attachment 1 Temperature is up 2 deg C from yesterday which explains leakage current increase Temp +26.6 deg C, Humidity 28.8% AND D.P +7.2 deg C FEE Temperatures ok - attachment 2 Good event statistics ok - attachment 3 17.40 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C - water level 75% H-L markers Temperature +25.4 deg C dew point +7.2 deg C RH 30.9% 17.47 DAQ continues OK to file May19/R7_6 alpha background ASIC settings 2018Oct03-13.26.58 except slow comparator 0xa -> 0x64 BNC PB-4 Pulser OFF all system wide checks OK except nnaida7 fails ADC calibration Check SYNC errors not counted since Baseline - see attachment 4 - also failed test following Collect All SYNC Count Errors for Baseline N.B. Check SYNC pulses received OK detector biases & leakage currents OK - see attachments 5 & 6 FEE64 temperatures OK - see attachment 7 good event statistics OK - see attachments 8 Merger OK - see attachment 9 TapeServer OK - see attachment 10 17.53 DAQ stopped file May19/R7_6 DAQ RESET DAQ SETUP all system wide checks OK except nnaida7 fails ADC calibration Sync all ASIC clocks using Re-Sync Check ASIC Control all ASICs & FEE64s 17.57 DAQ start file May19/R8 alpha background ASIC settings 2019May19-17.54.03 slow comparator 0x64 13.13 analysis of May19/R7_6 - see attachment 11 deadtime OK ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104) Also observed at a much lower rate for nnaida1 & nnaida2 Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown