ELOG AIDA

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

AIDA

Fields marked with * are required
Entry time:	Sat Mar 29 12:29:30 2025
Author*:
Subject*:
> 10:28 DAQ Continues ok > Alpha run continues - Currently on file R7_5 > > System wide checks all ok > leakage currents are up from yesterday - attachment 1 > Temperature is up 2 deg C from yesterday which explains leakage current increase > Temp +26.6 deg C, Humidity 28.8% AND D.P +7.2 deg C > > FEE Temperatures ok - attachment 2 > > Good event statistics ok - attachment 3 > > 17.40 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C - water level 75% H-L markers > Temperature +25.4 deg C dew point +7.2 deg C RH 30.9% > > 17.47 DAQ continues OK to file May19/R7_6 > > alpha background > > ASIC settings 2018Oct03-13.26.58 > except slow comparator 0xa -> 0x64 > > BNC PB-4 Pulser OFF > > all system wide checks OK except > nnaida7 fails ADC calibration > Check SYNC errors not counted since Baseline - see attachment 4 - also failed test following Collect All > SYNC Count Errors for Baseline > N.B. Check SYNC pulses received OK > > detector biases & leakage currents OK - see attachments 5 & 6 > > FEE64 temperatures OK - see attachment 7 > good event statistics OK - see attachments 8 > > Merger OK - see attachment 9 > TapeServer OK - see attachment 10 > > 17.53 DAQ stopped file May19/R7_6 > > DAQ RESET > DAQ SETUP > all system wide checks OK except nnaida7 fails ADC calibration > Sync all ASIC clocks using Re-Sync > Check ASIC Control all ASICs & FEE64s > > 17.57 DAQ start file May19/R8 > > alpha background > > ASIC settings 2019May19-17.54.03 > slow comparator 0x64 > > 13.13 analysis of May19/R7_6 - see attachment 11 > deadtime OK > ADC data for FEE64s nnaida5 & nnaida6 hot channels (Stat spectrum channel # 104) > Also observed at a much lower rate for nnaida1 & nnaida2 Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown